On 19/04/2012 10:55, Timo Ketola wrote: > The USB controller in i.MX25 has a PORTSCx registers which should be > set. In this regard it is similar to the controller in i.MX31. As this > file is compiled only with i.MX25 and -31, #ifdef check can be removed. > > Signed-off-by: Timo Ketola <t...@exertus.fi> > --- > > Changes in v4: > - Reworded subject to shorten it > - Added commit message > - Changed the fix from adding i.MX25 to removing the check altogether > > Changes in v2: > - Dropped patches 2, 3 and 6 so this one changed from 8 to 5 > - Rebased to u-boot-imx next > > drivers/usb/host/ehci-mxc.c | 2 -- > 1 files changed, 0 insertions(+), 2 deletions(-) >
Applied to u-boot-imx, thanks. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
