types.h must be included in imx-regs.h if one wants to include
imx-regs.h in a board configuration file. That for one's part is
necessary, if one wants to use addresses defined in imx-regs.h.
For example, fsl_esdhc.c needs CONFIG_SYS_FSL_ESDHC_ADDR defined and
a proper thing is to define it with IMX_MMC_SDHCx_BASE in board
configuration file. This patch fixes the build in that case.
Signed-off-by: Timo Ketola <t...@exertus.fi>
---
Changes in v4:
- Proper fix was found so this patch changes altogether - subject,
message and touched file
Changes in v2:
- New patch in this series
arch/arm/include/asm/arch-mx25/imx-regs.h | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h
b/arch/arm/include/asm/arch-mx25/imx-regs.h
index 7f9449b..cf925d7 100644
--- a/arch/arm/include/asm/arch-mx25/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx25/imx-regs.h
@@ -34,6 +34,9 @@
#define _IMX_REGS_H
#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+
#ifdef CONFIG_FEC_MXC
extern void mx25_fec_init_pins(void);
#endif
--
1.7.5.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
