On 19/04/2012 10:55, Timo Ketola wrote: > The reference manual of i.MX25 (nor i.MX31) does not define such > register. This seems to access read only UH2_CAPLENGTH register (if > CONFIG_MXC_USB_PORT is zero). > > Signed-off-by: Timo Ketola <t...@exertus.fi> > --- > > Changes in v4: > - Rewrapped commit message > > Changes in v2: > - New patch in this series > > drivers/usb/host/ehci-mxc.c | 2 -- > 1 files changed, 0 insertions(+), 2 deletions(-) > > diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c > index 7384580..45cbd18 100644 > --- a/drivers/usb/host/ehci-mxc.c > +++ b/drivers/usb/host/ehci-mxc.c > @@ -125,8 +125,6 @@ int ehci_hcd_init(void) > hcor = (struct ehci_hcor *)((uint32_t) hccr + > HC_LENGTH(ehci_readl(&hccr->cr_capbase))); > setbits_le32(&ehci->usbmode, CM_HOST); > - setbits_le32(&ehci->control, USB_EN); > - > __raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc); > mxc_set_usbcontrol(CONFIG_MXC_USB_PORT, CONFIG_MXC_USB_FLAGS); > Acked-by: Stefano Babic <sba...@denx.de>
Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
