Hi Tom,
On Mon, Feb 20, 2012 at 11:15 PM, Tom Rini <tr...@ti.com> wrote:
> On Fri, Feb 17, 2012 at 05:35:27PM +0530, R Sricharan wrote:
>
> > Adding the nessecary changes for OMAP5430 ES1.0 silicon.
> >
> > Signed-off-by: R Sricharan <r.sricha...@ti.com>
> [snip]
> > +/* OPP SETTING */
> > +#define OPP_NOM
>
> Where is this used?
> Right. This is unused. Will remove this. We were having
>
OPP_LOW and OPP_HIGH settings in the clocks table, for internal testing.
But that being eventually removed, this is not required.
> [snip]
> > /* Defines for SPL */
> > #define CONFIG_SPL
> > -#define CONFIG_SPL_TEXT_BASE 0x40304350
> > -#define CONFIG_SPL_MAX_SIZE 0x1E000 /* 120K */
> > +#define CONFIG_SPL_TEXT_BASE 0x40300350
> > +#define CONFIG_SPL_MAX_SIZE 0x20000 /* 128K */
> > #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
>
> This is wrong, you have to account for stack within SPL_MAX_SIZE.
>
> To understand,
So now, LOW_LEVEL_SRAM_STACK points to SRAM base + 128KB address (which
is the SRAM size),
pointed to by NON_SECURE_SRAM_END
Should this be changed ?
Also CONFIG_SYS_INIT_SP_ADDR should be adjusted. Will change this
> --
> Tom
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
