On Fri, Feb 17, 2012 at 05:35:32PM +0530, R Sricharan wrote:
> From: Balaji T K <balaj...@ti.com>
>
> Add omap5 pbias configuration for mmc1/sd lines
> and set voltage for sd data i/o lines
>
> Signed-off-by: Balaji T K <balaj...@ti.com>
[snip]
> diff --git a/drivers/power/twl6035.c b/drivers/power/twl6035.c
> index 978a7ad..878117e 100644
> --- a/drivers/power/twl6035.c
> +++ b/drivers/power/twl6035.c
> @@ -51,4 +51,18 @@ void twl6035_init_settings(void)
> {
> return;
> }
> +
> +void twl6035_mmc1_poweron_ldo(void)
> +{
> + u8 val = 0;
> +
> + /* set LDO9 TWL6035 to 3V */
> + val = 0x2b; /* (3 -.9)*28 +1 */
> + palmas_write_u8(0x48, LDO9_VOLTAGE, val);
> +
> + /* TURN ON LDO9 */
> + val = LDO_ON | LDO_MODE_SLEEP | LDO_MODE_ACTIVE;
> + palmas_write_u8(0x48, LDO9_CTRL, val);
> + return;
> +}
This is when we should add those two previous inlines. Please use
git test-sequence to make sure the series is clean, thanks.
--
Tom
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
