On 02/14/2012 02:07 PM, Marek Vasut wrote: >> Hi Marek, >> >> On 02/14/2012 01:37 PM, Marek Vasut wrote: >>>> Hi, Wolfgang, >>>> >>>>> -----Original Message----- >>>>> From: u-boot-boun...@lists.denx.de >>>>> [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Wolfgang >>>>> Grandegger Sent: Monday, February 13, 2012 8:08 PM >>>>> To: U-Boot >>>>> Subject: [U-Boot] mx6: consolidating and extending >>>>> anadig/analog/anatop register defs >>>>> >>>>> Hello, >>>>> >>>>> for the USB support on MX6Q, I'm trying to consolidate and extend >>>>> the register definitions for the ANADIG registers. Unfortunately, >>>>> three different names are used for the same registers: ANADIG, >>>>> analog and ANATOP. Any idea what the names do stand for and what >>>>> would be the most appropriate one. Apart from that, we should have >>>>> a separate structure and header file for these registers. >>>>> Currently, they are added to the CCM regs. >>>> >>>> The register definition in the CCM according to the RM as followings: >>>> Addresses: CCM_analog_PLL_SYS is 0h base + 0h offset = 0000_0000h >>>> CCM_analog_PLL_SYS_SET is 0h base + 4h offset = 0000_0004h >>>> CCM_analog_PLL_SYS_CLR is 0h base + 8h offset = 0000_0008h >>>> CCM_analog_PLL_SYS_TOG is 0h base + Ch offset = 0000_000Ch >>>> >>>> Thus, I put the register definition into the CCM parts. >>> >>> This again resembles MX28 ... damn, can't we share some parts of MX28 >>> for MX6Q ? >>> >>> Fabio, I think I'll need one too, this is getting weird ;-) >> >> Unfortunately, I did not get hold of a RM yet :(. > > RM? Who's that?
Reference Manual! > It's still under NDA, >> I believe. Therefore I will postpone my "consolidation" activities for >> the time being. > > Sorry, I don't intent to hinder your efforts, I'm just seeing a pattern :) > > The USB support patch I sent does work, as Dirk >> confirmed, and therefore I suggest to apply it as intermediate solution. > > Well ... All right then. Though my sense for perfect solution is hurting a > lot ;-) Well, that's OK and I realized some kind of mess as well, which should be fixed sooner than later. Wolfgang. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
