> Hi Marek, > > On 02/14/2012 01:37 PM, Marek Vasut wrote: > > > Hi, Wolfgang, > > > > > > > -----Original Message----- > > > > From: u-boot-boun...@lists.denx.de > > > > [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Wolfgang > > > > Grandegger Sent: Monday, February 13, 2012 8:08 PM > > > > To: U-Boot > > > > Subject: [U-Boot] mx6: consolidating and extending > > > > anadig/analog/anatop register defs > > > > > > > > Hello, > > > > > > > > for the USB support on MX6Q, I'm trying to consolidate and extend > > > > the register definitions for the ANADIG registers. Unfortunately, > > > > three different names are used for the same registers: ANADIG, > > > > analog and ANATOP. Any idea what the names do stand for and what > > > > would be the most appropriate one. Apart from that, we should have > > > > a separate structure and header file for these registers. > > > > Currently, they are added to the CCM regs. > > > > > > The register definition in the CCM according to the RM as followings: > > > Addresses: CCM_analog_PLL_SYS is 0h base + 0h offset = 0000_0000h > > > CCM_analog_PLL_SYS_SET is 0h base + 4h offset = 0000_0004h > > > CCM_analog_PLL_SYS_CLR is 0h base + 8h offset = 0000_0008h > > > CCM_analog_PLL_SYS_TOG is 0h base + Ch offset = 0000_000Ch > > > > > > Thus, I put the register definition into the CCM parts. > > > > This again resembles MX28 ... damn, can't we share some parts of MX28 > > for MX6Q ? > > > > Fabio, I think I'll need one too, this is getting weird ;-) > > Unfortunately, I did not get hold of a RM yet :(.
RM? Who's that? It's still under NDA, > I believe. Therefore I will postpone my "consolidation" activities for > the time being. Sorry, I don't intent to hinder your efforts, I'm just seeing a pattern :) The USB support patch I sent does work, as Dirk > confirmed, and therefore I suggest to apply it as intermediate solution. Well ... All right then. Though my sense for perfect solution is hurting a lot ;-) > > Wolfgang. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
