> Hi, Wolfgang, > > >-----Original Message----- > >From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de] > >On Behalf Of Wolfgang Grandegger > >Sent: Monday, February 13, 2012 8:08 PM > >To: U-Boot > >Subject: [U-Boot] mx6: consolidating and extending anadig/analog/anatop > >register defs > > > >Hello, > > > >for the USB support on MX6Q, I'm trying to consolidate and extend the > >register definitions for the ANADIG registers. Unfortunately, three > >different names are used for the same registers: ANADIG, analog and > >ANATOP. Any idea what the names do stand for and what would be the most > >appropriate one. Apart from that, we should have a separate structure and > >header file for these registers. Currently, they are added to the CCM > >regs. > > The register definition in the CCM according to the RM as followings: > Addresses: CCM_analog_PLL_SYS is 0h base + 0h offset = 0000_0000h > CCM_analog_PLL_SYS_SET is 0h base + 4h offset = 0000_0004h > CCM_analog_PLL_SYS_CLR is 0h base + 8h offset = 0000_0008h > CCM_analog_PLL_SYS_TOG is 0h base + Ch offset = 0000_000Ch > > Thus, I put the register definition into the CCM parts.
This again resembles MX28 ... damn, can't we share some parts of MX28 for MX6Q ? Fabio, I think I'll need one too, this is getting weird ;-) M _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
