Hi all, i'm trying to use the u-boot on an at91sam9260ek board, i cannot start successfull the u-boot binary.
build u-boot 2011.09: export CROSS_COMPILE=/opt/arm-2010q1/bin/arm-none-linux-gnueabi- /MAKEALL at91sam9260ek_nandflash load & start: RomBOOT > U-Boot 1.3.4 (Mar 9 2010 - 19:29:50) DRAM: 64 MB NAND: 256 MiB DataFlash:AT45DB642 Nb pages: 8192 Page Size: 1056 Size= 8650752 bytes Logical address: 0xD0000000 Area 0: D0000000 to D00041FF (RO) Bootstrap Area 1: D0004200 to D00083FF Environment Area 2: D0008400 to D0041FFF (RO) U-Boot Area 3: D0042000 to D0251FFF Kernel Area 4: D0252000 to D083FFFF FS In: serial Out: serial Err: serial Net: macb0 macb0: Starting autonegotiation... macb0: Autonegotiation timed out (status=0x7849) macb0: link down (status: 0x7849) Hit any key to stop autoboot: 0 U-Boot> loadb ## Ready for binary (kermit) download to 0x22000000 at 115200 bps... (Back at ld2036) ---------------------------------------------------- (/home/fabiopo/) C-Kermit>send u-boot.bin (/home/fabiopo/) C-Kermit>connect Connecting to /dev/ttyS0, speed 115200 Escape character: Ctrl-\ (ASCII 28, FS): enabled Type the escape character followed by C to get back, or followed by ? to see other options. ---------------------------------------------------- ## Total Size = 0x00029d68 = 171368 Bytes ## Start Addr = 0x22000000 U-Boot> go 0x22000000 ## Starting application at 0x22000000 ... I don't have problems running the linux4sam u-boot binary, using the same commands. ftp://www.at91.com/pub/uboot/u-boot-1.3.4-exp.4/u-boot-1.3.4-exp.4-at91sam9260ek-nandflash.bin I'm making something wrong? Someone can help me? Thanks in advance for any help Fabio Porcedda _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
