Hello Igor,
Igor Grinberg wrote:
> Hi Heiko,
>
> On 09/15/11 08:59, Heiko Schocher wrote:
>> - booting from NOR Flash with direct boot method
>> - POST support
>> - LOGBUF support
>>
>> Signed-off-by: Heiko Schocher <h...@denx.de>
>> Cc: Paulraj Sandeep <s-paul...@ti.com>
>> Cc: Albert ARIBAUD <albert.u.b...@aribaud.net>
>> ---
>
> [...]
>
>> diff --git a/board/enbw/enbw_cmc/enbw_cmc.c b/board/enbw/enbw_cmc/enbw_cmc.c
>> new file mode 100644
>> index 0000000..1b9ee67
>> --- /dev/null
>> +++ b/board/enbw/enbw_cmc/enbw_cmc.c
>
> [...]
>
>> +
>> +int board_init(void)
>> +{
>> +#ifndef CONFIG_USE_IRQ
>> + irq_init();
>> +#endif
>> +
>> + /* arch number of the board */
>> + gd->bd->bi_arch_number = 3585;
>
> There is a new standard option for assigning the machid.
> Now, this should be done in the board config file and the above two lines
> removed.
> Please, see the CONFIG_MACH_TYPE in the U-Boot documentation (README file).
Ah, thanks!
> [...]
>
>> diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h
>> new file mode 100644
>> index 0000000..5de752f
>> --- /dev/null
>> +++ b/include/configs/enbw_cmc.h
>
> [...]
>
>> +/*
>> + * Board
>> + */
>> +#define CONFIG_DRIVER_TI_EMAC
>> +#define CONFIG_USE_NAND
>
> Consider adding here:
> #define MACH_TYPE_ENBW_CMC 3585
> #define CONFIG_MACH_TYPE MACH_TYPE_ENBW_CMC
Yep! Change this for v2, thanks!
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
