Hello Heiko, On Mon, Sep 19, 2011 at 7:50 AM, Heiko Schocher <h...@denx.de> wrote: > - booting from NOR Flash with direct boot method > - POST support > - LOGBUF support > > Signed-off-by: Heiko Schocher <h...@denx.de> > Cc: Paulraj Sandeep <s-paul...@ti.com> > Cc: Albert ARIBAUD <albert.u.b...@aribaud.net> > Cc: Igor Grinberg <grinb...@compulab.co.il> > --- > - changes for v2 > - use CONFIG_MACH_TYPE instead setting the MACH_TYPE in > board specific code, as Igor Grinberg suggested. > - add logversion=2 to default Environment > > board/enbw/enbw_cmc/Makefile | 51 ++++ > board/enbw/enbw_cmc/enbw_cmc.c | 570 > ++++++++++++++++++++++++++++++++++++++++ > boards.cfg | 1 + > include/configs/enbw_cmc.h | 443 +++++++++++++++++++++++++++++++ > 4 files changed, 1065 insertions(+), 0 deletions(-) > create mode 100644 board/enbw/enbw_cmc/Makefile > create mode 100644 board/enbw/enbw_cmc/enbw_cmc.c > create mode 100644 include/configs/enbw_cmc.h
[...] > diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h > new file mode 100644 > index 0000000..e203089 > --- /dev/null > +++ b/include/configs/enbw_cmc.h [...] > +#define CONFIG_SYS_AM1808_PLL0_PLLM 37 /* PLL0 -> 456 MHz */ With a 24 MHz input frequency this would result in a PLL0 frequency of 24MHz / PREDIV * (CONFIG_SYS_AM1808_PLL0_PLLM + 1), so I guess you assume a PREDIV of 2 here (PREDIV register value 0x00008001). However, the AM1808 datasheet and the reference guide (section 7.3.10) state that the default PREDIV is 1 (register value 0x00008000) and I don't see how you set the PREDIV to 2. Am I missing something here? Regards, Christian _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
