This patch adds MMC_HS_52 to the timing data structure. Previously, this bus mode tap settings were not populated and were instead populated for MMC_HS which is a different bus mode up to 26MHz. Since we intended these settings according to the device data sheet[0] for MMC_HS_52 up to 52MHz, populate MMC_HS tap settings for MMC_HS_52.
While we are here, fix typo in ti,itap-del-sel-mms-hs. [0] https://www.ti.com/lit/ds/symlink/am625.pdf Table 7-79 Signed-off-by: Judith Mendez <j...@ti.com> --- drivers/mmc/am654_sdhci.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/am654_sdhci.c b/drivers/mmc/am654_sdhci.c index b4c60a48d2e..e4fa8a88565 100644 --- a/drivers/mmc/am654_sdhci.c +++ b/drivers/mmc/am654_sdhci.c @@ -125,12 +125,15 @@ static const struct timing_data td[] = { [MMC_LEGACY] = {"ti,otap-del-sel-legacy", "ti,itap-del-sel-legacy", 0}, - [MMC_HS] = {"ti,otap-del-sel-mmc-hs", - "ti,itap-del-sel-mms-hs", + [MMC_HS] = {"ti,otap-del-sel-mmc-hs26", + "ti,itap-del-sel-mmc-hs26", MMC_CAP(MMC_HS)}, [SD_HS] = {"ti,otap-del-sel-sd-hs", "ti,itap-del-sel-sd-hs", MMC_CAP(SD_HS)}, + [MMC_HS_52] = {"ti,otap-del-sel-mmc-hs", + "ti,itap-del-sel-mmc-hs", + MMC_CAP(MMC_HS_52)}, [UHS_SDR12] = {"ti,otap-del-sel-sdr12", "ti,itap-del-sel-sdr12", MMC_CAP(UHS_SDR12)}, -- 2.49.0
