On Sun, 3 Nov 2024 at 02:08, Jonas Karlman <jo...@kwiboo.se> wrote:
>
> Implement checkboard() to print current SoC model used by a board,
> e.g. one of:
>
> SoC: RK3582 v1
> SoC: RK3588 v0
> SoC: RK3588 v1
> SoC: RK3588S v0
> SoC: RK3588S v1
> SoC: RK3588S2 v1
>
> when U-Boot proper is running.
>
> U-Boot 2025.01-rc1 (Nov 02 2024 - 20:19:01 +0000)
>
> Model: Generic RK3588S/RK3588
> SoC: RK3588S2 v1
> DRAM: 8 GiB
>
> Information about the SoC model, variant and version is read from OTP.
>
> Also update rk3588s-u-boot.dtsi to include OTP in U-Boot pre-reloc phase,
> where checkboard() is called.
>
> Signed-off-by: Jonas Karlman <jo...@kwiboo.se>
> ---
> v2:
> - Update commit message
> - Update code comments
> - Drop generic-rk3588_defconfig change
> ---
> arch/arm/dts/rk3588s-u-boot.dtsi | 4 ++
> arch/arm/mach-rockchip/rk3588/rk3588.c | 58 ++++++++++++++++++++++++++
> 2 files changed, 62 insertions(+)
>
> diff --git a/arch/arm/dts/rk3588s-u-boot.dtsi
b/arch/arm/dts/rk3588s-u-boot.dtsi
> index 09d8b311cec5..8880d162b11c 100644
> --- a/arch/arm/dts/rk3588s-u-boot.dtsi
> +++ b/arch/arm/dts/rk3588s-u-boot.dtsi
> @@ -69,6 +69,10 @@
> bootph-all;
> };
>
> +&otp {
> + bootph-some-ram;
> +};
> +
> &pcfg_pull_down {
> bootph-all;
> };
> diff --git a/arch/arm/mach-rockchip/rk3588/rk3588.c
b/arch/arm/mach-rockchip/rk3588/rk3588.c
> index e2dac2a5b806..f9da7a6f1477 100644
> --- a/arch/arm/mach-rockchip/rk3588/rk3588.c
> +++ b/arch/arm/mach-rockchip/rk3588/rk3588.c
> @@ -4,6 +4,8 @@
> * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
> */
>
> +#include <dm.h>
> +#include <misc.h>
> #include <spl.h>
> #include <asm/armv8/mmu.h>
> #include <asm/arch-rockchip/bootrom.h>
> @@ -178,3 +180,59 @@ int arch_cpu_init(void)
> return 0;
> }
> #endif
> +
> +#define RK3588_OTP_CPU_CODE_OFFSET 0x02
> +#define RK3588_OTP_SPECIFICATION_OFFSET 0x06
> +#define RK3588_OTP_CPU_VERSION_OFFSET 0x1c
> +
> +int checkboard(void)
> +{
> + u8 cpu_code[2], specification, package, cpu_version;
> + struct udevice *dev;
> + char suffix[3];
> + int ret;
> +
> + ret = uclass_get_device_by_driver(UCLASS_MISC,
> + DM_DRIVER_GET(rockchip_otp),
&dev);
> + if (ret) {
> + debug("%s: could not find otp device, ret=%d\n",
__func__, ret);
> + return 0;
> + }
> +
> + /* cpu-code: SoC model, e.g. 0x35 0x82 or 0x35 0x88 */
> + ret = misc_read(dev, RK3588_OTP_CPU_CODE_OFFSET, cpu_code, 2);
> + if (ret < 0) {
> + debug("%s: could not read cpu-code, ret=%d\n", __func__,
ret);
> + return 0;
> + }
> +
> + /* specification: SoC variant, e.g. 0xA for RK3588J and 0x13 for
RK3588S */
> + ret = misc_read(dev, RK3588_OTP_SPECIFICATION_OFFSET,
&specification, 1);
Any register to find the operating temperature of the chip?
Jagan.
