Use board_early_init_f so that the full boot log output can be displayed.
Signed-off-by: Stefano Babic <sba...@denx.de>
CC: Sandeep Paulraj <s-paul...@ti.com>
---
board/davinci/ea20/ea20.c | 18 +++++++++++-------
1 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/board/davinci/ea20/ea20.c b/board/davinci/ea20/ea20.c
index f43d644..5025117 100644
--- a/board/davinci/ea20/ea20.c
+++ b/board/davinci/ea20/ea20.c
@@ -116,7 +116,7 @@ static const struct lpsc_resource lpsc[] = {
{ DAVINCI_LPSC_GPIO },
};
-int board_init(void)
+int board_early_init_f(void)
{
struct davinci_gpio *gpio6_base =
(struct davinci_gpio *)DAVINCI_GPIO_BANK67;
@@ -160,12 +160,6 @@ int board_init(void)
&davinci_emif_regs->ab1cr); /* CS2 */
#endif
- /* arch number of the board */
- gd->bd->bi_arch_number = MACH_TYPE_EA20;
-
- /* address of boot parameters */
- gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-
/*
* Power on required peripherals
* ARM does not have access by default to PSC0 and PSC1
@@ -201,6 +195,16 @@ int board_init(void)
return 0;
}
+int board_init(void)
+{
+ /* arch number of the board */
+ gd->bd->bi_arch_number = MACH_TYPE_EA20;
+
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
+
+ return 0;
+}
#ifdef CONFIG_DRIVER_TI_EMAC
/*
--
1.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
