In case the Buck5 and Buck6 regulators which supply DRAM Vdd1 and Vdd2/Vddq
respectively operate in automatic PWM/PFM mode, the DRAM EDAC detects more
correctable errors than if the regulators operate in forced PWM only mode.
Force DRAM regulators to forced PWM mode only to stop tempting the DRAM.
Signed-off-by: Marek Vasut <ma...@denx.de>
---
Cc: "NXP i.MX U-Boot Team" <uboot-...@nxp.com>
Cc: Fabio Estevam <feste...@gmail.com>
Cc: Stefano Babic <sba...@denx.de>
---
board/data_modul/imx8mp_edm_sbc/spl.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/board/data_modul/imx8mp_edm_sbc/spl.c
b/board/data_modul/imx8mp_edm_sbc/spl.c
index cfc4b65e0f9..a3600c8568a 100644
--- a/board/data_modul/imx8mp_edm_sbc/spl.c
+++ b/board/data_modul/imx8mp_edm_sbc/spl.c
@@ -68,6 +68,11 @@ int data_modul_imx_edm_sbc_board_power_init(void)
/* To avoid timing risk from SoC to ARM, increase VDD_ARM to OD voltage
0.95V */
pmic_reg_write(dev, PCA9450_BUCK2OUT_DVS0, 0x1c);
+ /* DRAM Vdd1 always FPWM */
+ pmic_reg_write(dev, PCA9450_BUCK5CTRL, 0x0d);
+ /* DRAM Vdd2/Vddq always FPWM */
+ pmic_reg_write(dev, PCA9450_BUCK6CTRL, 0x0d);
+
/* Set LDO4 and CONFIG2 to enable the I2C level translator. */
pmic_reg_write(dev, PCA9450_LDO4CTRL, 0x59);
pmic_reg_write(dev, PCA9450_CONFIG2, 0x1);
--
2.42.0
