On Fri, 7 Jul 2023 18:50:06 +0800 Hal Feng <hal.f...@starfivetech.com> wrote:
> The clock dt-bindings and DT nodes are not consistent with Linux now. > Let's sync them with Linux, so the same dtb can work for Linux & U-Boot. > > To achieve this goal, the PLL clock driver is separated and some clock > IDs conversion is needed in clock drivers. > > For the motivation, please see the discussion in the link below. > > [1] > https://patchwork.kernel.org/project/linux-riscv/patch/20230512022036.97987-2-xingyu...@starfivetech.com/ > > Xingyu Wu (5): > clk: starfive: jh7110: Separate the PLL driver > riscv: dts: jh7110: Add PLL clock controller node > riscv: dts: jh7110: Add clock source from PLL > dt-bindings: clock: jh7110: Modify clock id to be same with Linux > clk: starfive: jh7110: Add of_xlate ops and macros for clock id > conversion For better bisectability, I would have put patch 2 first, then merged 1&3, then merged 4&5. This way U-Boot should compile and boot after each patch (I think, untested ;) But given the rapid development of the platform, I'm fine with inclusion of the series as-is; as it does not affect other targets. I'm also wondering whether the symbolic clock number constants should be synced, too. But that's also a minor issue, as long as they expand to yield the same numbers. For the series: Reviewed-by: Torsten Duwe <d...@suse.de> Torsten
