Hi Albert, On 2/8/2011 6:50 PM, Albert ARIBAUD wrote: > Le 08/02/2011 21:18, stefano babic a écrit : >> Am 08.02.2011 20:26, schrieb Magnus Lilja: >>> Patch reposted as a separate mail a couple of minutes ago. >>> >>> As I mention in the patch I think Fabio's patch has to be applied first. >> >> I think your patch is ok - Fabio fixed the syntax error as you do. We >> need only one of them. >> >>> Another solution would be to change my patch somewhat to apply it first >>> and then update Fabios patch to only touch the i.MX31-PDK specific >>> files. >> >> IMHO this is the preferred way, because the two issues are orthogonal. >> Your patch fixes booting from NAND for ARM11, and Fabio's patch fix the >> mx31pdk board only. > > Agreed.
Ok, I have just submitted the patch series treating one issue at the time. > Note also that there was a recent patch to ARM926's start.S (replacing 'adr > r1, _start' with 'ldr r1, _TEXT_BASE' at line 284). The same should be done > on arm1136. Ok, I haven´t added this change to my patch series yet, but I can do it on a separate patch after my original patch series is applied, if this is OK with you. I have tested this recommended change and it worked fine on my mx31pdk board. Thanks, Fabio Estevam _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
