On 02/07/2011 12:32 PM, Fabio Estevam wrote:
> Hi Magnus,
>
> On 2/6/2011 10:03 AM, Magnus Lilja wrote: ...
>
Hi,
>> I have no idea if this breaks other boards but at least it's start
>> for further work. I tried it on the imx31 litekit (which boots from
>> NOR) but that board doesn't seem to boot even before applying
>> Fabios patch, I'll see if I can figure out why that board is broken
>> now. Don't know when though.
>
> I will let others comment about the changes you did in
> arch/arm/cpu/arm1136/start.S Will also try it later today.
Anyway, arch/arm/cpu/arm1136/start.S cannot be compiled without the
changes suggested by Magnus due to the following lines:
_nand_boot_ofs
: .word nand_boot - _start
":" seems to me wrong in any case and should be fixed. Is this syntax
accepted by newer compiler releases ?
IMHO board_init_f must be called absolutely before nand_boot. I have
tested the changes suggested by Magnus on a i.MX35 and the board boots
from NAND. However, I do not see the problems with the console, and I
can think they are not related to this issue.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
