On Wed, Apr 13, 2022 at 8:56 AM Michael Nazzareno Trimarchi <mich...@amarulasolutions.com> wrote: > > Hi Tim > > On Wed, Apr 13, 2022 at 5:47 PM Tim Harvey <thar...@gateworks.com> wrote: > > > > Enable DM_SERIAL. > > > > Signed-off-by: Tim Harvey <thar...@gateworks.com> > > --- > > v2: rebase on imx/master > > --- > > configs/imx8mm_venice_defconfig | 2 ++ > > configs/imx8mn_venice_defconfig | 2 ++ > > 2 files changed, 4 insertions(+) > > > > diff --git a/configs/imx8mm_venice_defconfig > > b/configs/imx8mm_venice_defconfig > > index dd61ec9b70fb..09f7d8a58ca7 100644 > > --- a/configs/imx8mm_venice_defconfig > > +++ b/configs/imx8mm_venice_defconfig > > @@ -110,6 +110,8 @@ CONFIG_SPL_DM_PMIC_MP5416=y > > CONFIG_DM_REGULATOR=y > > CONFIG_DM_REGULATOR_FIXED=y > > CONFIG_DM_REGULATOR_GPIO=y > > +CONFIG_DM_SERIAL=y > > +# CONFIG_SPL_DM_SERIAL is not set > > CONFIG_MXC_UART=y > > CONFIG_SYSRESET=y > > CONFIG_SPL_SYSRESET=y > > diff --git a/configs/imx8mn_venice_defconfig > > b/configs/imx8mn_venice_defconfig > > index c3a96a378553..41898da4aecf 100644 > > --- a/configs/imx8mn_venice_defconfig > > +++ b/configs/imx8mn_venice_defconfig > > @@ -108,6 +108,8 @@ CONFIG_SPL_DM_PMIC_MP5416=y > > CONFIG_DM_REGULATOR=y > > CONFIG_DM_REGULATOR_FIXED=y > > CONFIG_DM_REGULATOR_GPIO=y > > +CONFIG_DM_SERIAL=y > > +# CONFIG_SPL_DM_SERIAL is not set > > CONFIG_MXC_UART=y > > CONFIG_SYSRESET=y > > CONFIG_SPL_SYSRESET=y > > -- > > 2.17.1 > > > > Should not select in your board kconfig? >
Michael, I don't think it really matters. The other conversions to DM_SERIAL are going in defconfigs as well. Best Regards, Tim
