Le 04/12/2010 07:51, Dirk Behme a écrit : > On 03.12.2010 22:11, Carlo Caione wrote: >> On Thu, 2010-12-02 at 20:40 -0800, Prafulla Wadaskar wrote: >>> >>>> -----Original Message----- >>>> From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de] >>>> On Behalf Of Carlo Caione >>>> Sent: Friday, December 03, 2010 3:11 AM >>>> To: U-Boot@lists.denx.de >>>> Subject: Re: [U-Boot] [STATUS] v2010.12-rc2 released >>>> >>>>> Some of the times, the boot hung after printing DRAM: 128 MiB, >>>>> but never did it hang without printing anything. >>>> >>>> The same here. >>>> Beagleboard xM rev.A hangs after DRAM: 256 MiB >>> >>> For fix this, needs to change global variables in timer.c >>> REF: http://lists.denx.de/pipermail/u-boot/2010-December/082834.html >> >> Applied but nothing is changed: >> >> Texas Instruments X-Loader 1.4.4ss (Dec 2 2010 - 21:40:58) >> Beagle xM Rev A >> Reading boot sector >> Loading u-boot.bin from mmc >> >> >> U-Boot 2010.12-rc2-00029-g49733aa-dirty (Dec 03 2010 - 22:05:44) >> >> OMAP3630/3730-GP ES1.0, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz >> OMAP3 Beagle board + LPDDR/NAND >> I2C: ready >> DRAM: 512 MiB > > I'm not totally sure, so sorry if I'm wrong. But: > > I understood the link given by Prafulla above only as a reference what > has to be done to fix the OMAP hang. I don't think the given patch > fixes the issue itself. Most probably we additionally need something like > > http://lists.denx.de/pipermail/u-boot/2010-December/082965.html > > for OMAP, too?
Also make sure that the r8 register is not trashed by the relocation code in the start.S used for this board. See Andreas' patch for that. > Best regards > > Dirk Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
