On 03.12.2010 22:11, Carlo Caione wrote: > On Thu, 2010-12-02 at 20:40 -0800, Prafulla Wadaskar wrote: >> >>> -----Original Message----- >>> From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de] >>> On Behalf Of Carlo Caione >>> Sent: Friday, December 03, 2010 3:11 AM >>> To: U-Boot@lists.denx.de >>> Subject: Re: [U-Boot] [STATUS] v2010.12-rc2 released >>> >>>> Some of the times, the boot hung after printing DRAM: 128 MiB, >>>> but never did it hang without printing anything. >>> >>> The same here. >>> Beagleboard xM rev.A hangs after DRAM: 256 MiB >> >> For fix this, needs to change global variables in timer.c >> REF: http://lists.denx.de/pipermail/u-boot/2010-December/082834.html > > Applied but nothing is changed: > > Texas Instruments X-Loader 1.4.4ss (Dec 2 2010 - 21:40:58) > Beagle xM Rev A > Reading boot sector > Loading u-boot.bin from mmc > > > U-Boot 2010.12-rc2-00029-g49733aa-dirty (Dec 03 2010 - 22:05:44) > > OMAP3630/3730-GP ES1.0, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz > OMAP3 Beagle board + LPDDR/NAND > I2C: ready > DRAM: 512 MiB
I'm not totally sure, so sorry if I'm wrong. But: I understood the link given by Prafulla above only as a reference what has to be done to fix the OMAP hang. I don't think the given patch fixes the issue itself. Most probably we additionally need something like http://lists.denx.de/pipermail/u-boot/2010-December/082965.html for OMAP, too? Best regards Dirk _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot