Hi Heinrich, On Fri, Oct 1, 2021 at 7:37 PM Heinrich Schuchardt <heinrich.schucha...@canonical.com> wrote: > > Avoid an error like > > Could not get FIT buffer of 1725952 bytes > check CONFIG_SYS_SPL_MALLOC_SIZE > No device tree specified in SPL image > ### ERROR ### Please RESET the board ### > > Signed-off-by: Heinrich Schuchardt <heinrich.schucha...@canonical.com> > --- > include/configs/sifive-unmatched.h | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/include/configs/sifive-unmatched.h > b/include/configs/sifive-unmatched.h > index f8ad2cce1f..8d3deabdd3 100644 > --- a/include/configs/sifive-unmatched.h > +++ b/include/configs/sifive-unmatched.h > @@ -18,7 +18,7 @@ > #define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 > #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ > CONFIG_SPL_BSS_MAX_SIZE) > -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 > +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00200000 > > #define CONFIG_SPL_STACK (0x08000000 + 0x001D0000 - \ > GENERATED_GBL_DATA_SIZE)
What caused this? Last time this was seen on Ax25-AE350, CONFIG_SPL_SYS_MALLOC_F_LEN was increased, instead of CONFIG_SYS_SPL_MALLOC_SIZE which the error messages point to https://lists.denx.de/pipermail/u-boot/2021-May/449447.html Regards, Bin
