On Tue, Oct 19, 2021 at 10:55 AM Bin Meng <bmeng...@gmail.com> wrote: > > On Tue, Oct 19, 2021 at 4:32 PM Alexandre Ghiti > <alexandre.gh...@canonical.com> wrote: > > > > Hi, > > > > On Fri, Oct 1, 2021 at 5:35 PM Bin Meng <bmeng...@gmail.com> wrote: > > > > > > Hi Heinrich, > > > > > > On Fri, Oct 1, 2021 at 7:37 PM Heinrich Schuchardt > > > <heinrich.schucha...@canonical.com> wrote: > > > > > > > > Avoid an error like > > > > > > > > Could not get FIT buffer of 1725952 bytes > > > > check CONFIG_SYS_SPL_MALLOC_SIZE > > > > No device tree specified in SPL image > > > > ### ERROR ### Please RESET the board ### > > > > > > > > Signed-off-by: Heinrich Schuchardt <heinrich.schucha...@canonical.com> > > > > --- > > > > include/configs/sifive-unmatched.h | 2 +- > > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > > > diff --git a/include/configs/sifive-unmatched.h > > > > b/include/configs/sifive-unmatched.h > > > > index f8ad2cce1f..8d3deabdd3 100644 > > > > --- a/include/configs/sifive-unmatched.h > > > > +++ b/include/configs/sifive-unmatched.h > > > > @@ -18,7 +18,7 @@ > > > > #define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 > > > > #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ > > > > CONFIG_SPL_BSS_MAX_SIZE) > > > > -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 > > > > +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00200000 > > > > > > > > #define CONFIG_SPL_STACK (0x08000000 + 0x001D0000 - \ > > > > GENERATED_GBL_DATA_SIZE) > > > > > > What caused this? > > > > > > Last time this was seen on Ax25-AE350, CONFIG_SPL_SYS_MALLOC_F_LEN was > > > increased, instead of CONFIG_SYS_SPL_MALLOC_SIZE which the error > > > messages point to > > > > > > https://lists.denx.de/pipermail/u-boot/2021-May/449447.html > > > > > > > I fell into the same issue this morning and increasing > > CONFIG_SYS_SPL_MALLOC_SIZE fixed it, though I had to increase it even > > more than Heinrich. > > Is this default build that caused Unmatched boot failure?
Yes but I made a mistake as I used openSBI fw_payload.bin instead of fw_dymanic.bin and the fw_payload.bin is ~2MB against 74K for the fw_dynamic.bin. Sorry about that! Alex > > @Rick Chen can you comment on why CONFIG_SPL_SYS_MALLOC_F_LEN was > needed on AE350? > > Regards, > Bin
