Hi, On Fri, Oct 1, 2021 at 5:35 PM Bin Meng <bmeng...@gmail.com> wrote: > > Hi Heinrich, > > On Fri, Oct 1, 2021 at 7:37 PM Heinrich Schuchardt > <heinrich.schucha...@canonical.com> wrote: > > > > Avoid an error like > > > > Could not get FIT buffer of 1725952 bytes > > check CONFIG_SYS_SPL_MALLOC_SIZE > > No device tree specified in SPL image > > ### ERROR ### Please RESET the board ### > > > > Signed-off-by: Heinrich Schuchardt <heinrich.schucha...@canonical.com> > > --- > > include/configs/sifive-unmatched.h | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/include/configs/sifive-unmatched.h > > b/include/configs/sifive-unmatched.h > > index f8ad2cce1f..8d3deabdd3 100644 > > --- a/include/configs/sifive-unmatched.h > > +++ b/include/configs/sifive-unmatched.h > > @@ -18,7 +18,7 @@ > > #define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 > > #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ > > CONFIG_SPL_BSS_MAX_SIZE) > > -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 > > +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00200000 > > > > #define CONFIG_SPL_STACK (0x08000000 + 0x001D0000 - \ > > GENERATED_GBL_DATA_SIZE) > > What caused this? > > Last time this was seen on Ax25-AE350, CONFIG_SPL_SYS_MALLOC_F_LEN was > increased, instead of CONFIG_SYS_SPL_MALLOC_SIZE which the error > messages point to > > https://lists.denx.de/pipermail/u-boot/2021-May/449447.html >
I fell into the same issue this morning and increasing CONFIG_SYS_SPL_MALLOC_SIZE fixed it, though I had to increase it even more than Heinrich. Alex > Regards, > Bin
