On 31.07.21 14:22, Pali Rohár wrote:
This mvebu axp platform always uses fixed 250 MHz TCLK. So specify this
CONFIG_SYS_TCLK option in msys section of global file soc.h file instead of
manual configuration in every board file.
Now every #if-#else case of soc.h file defines CONFIG_SYS_TCLK, so remove
useless default CONFIG_SYS_TCLK value from the end of soc.h file.
Signed-off-by: Pali Rohár <p...@kernel.org>
Reviewed-by: Stefan Roese <s...@denx.de>
Thanks,
Stefan
---
arch/arm/mach-mvebu/include/mach/soc.h | 3 ---
include/configs/db-mv784mp-gp.h | 1 -
include/configs/ds414.h | 1 -
include/configs/maxbcm.h | 1 -
include/configs/theadorable.h | 1 -
5 files changed, 7 deletions(-)
diff --git a/arch/arm/mach-mvebu/include/mach/soc.h
b/arch/arm/mach-mvebu/include/mach/soc.h
index e29c0f32c3de..8e8a4058550e 100644
--- a/arch/arm/mach-mvebu/include/mach/soc.h
+++ b/arch/arm/mach-mvebu/include/mach/soc.h
@@ -208,10 +208,7 @@
#define BOOT_FROM_UART 0x2
#define BOOT_FROM_SPI 0x3
-#endif
-/* TCLK Core Clock definition */
-#ifndef CONFIG_SYS_TCLK
#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
#endif
diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h
index ef7eebd081f9..f1b79e8a1fb8 100644
--- a/include/configs/db-mv784mp-gp.h
+++ b/include/configs/db-mv784mp-gp.h
@@ -16,7 +16,6 @@
* for DDR ECC byte filling in the SPL before loading the main
* U-Boot into it.
*/
-#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
/* I2C */
#define CONFIG_SYS_I2C
diff --git a/include/configs/ds414.h b/include/configs/ds414.h
index 4bbb244fa227..9fe830965854 100644
--- a/include/configs/ds414.h
+++ b/include/configs/ds414.h
@@ -18,7 +18,6 @@
* for DDR ECC byte filling in the SPL before loading the main
* U-Boot into it.
*/
-#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
/* I2C */
#define CONFIG_SYS_I2C
diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h
index 0c2185c529f7..a8cffcb82d43 100644
--- a/include/configs/maxbcm.h
+++ b/include/configs/maxbcm.h
@@ -15,7 +15,6 @@
* for DDR ECC byte filling in the SPL before loading the main
* U-Boot into it.
*/
-#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
/* I2C */
#define CONFIG_SYS_I2C
diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h
index 31852fb24801..54e60a4094f8 100644
--- a/include/configs/theadorable.h
+++ b/include/configs/theadorable.h
@@ -15,7 +15,6 @@
* for DDR ECC byte filling in the SPL before loading the main
* U-Boot into it.
*/
-#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
/*
* The debugging version enables USB support via defconfig.
Viele Grüße,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
