On 31.07.21 14:22, Pali Rohár wrote:
This mvebu msys platform always uses fixed 200 MHz TCLK. So specify this
CONFIG_SYS_TCLK option in msys section of global file soc.h file instead of
manual configuration in every board file.
Signed-off-by: Pali Rohár <p...@kernel.org>
Reviewed-by: Stefan Roese <s...@denx.de>
Thanks,
Stefan
---
arch/arm/mach-mvebu/include/mach/soc.h | 2 ++
include/configs/crs3xx-98dx3236.h | 1 -
include/configs/db-xc3-24g4xg.h | 1 -
3 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-mvebu/include/mach/soc.h
b/arch/arm/mach-mvebu/include/mach/soc.h
index eb6906ad8027..e29c0f32c3de 100644
--- a/arch/arm/mach-mvebu/include/mach/soc.h
+++ b/arch/arm/mach-mvebu/include/mach/soc.h
@@ -187,6 +187,8 @@
#define BOOT_FROM_NAND 0x1
#define BOOT_FROM_UART 0x2
#define BOOT_FROM_SPI 0x3
+
+#define CONFIG_SYS_TCLK 200000000 /* 200MHz */
#else
/* SAR values for Armada XP */
#define CONFIG_SAR_REG (MVEBU_REGISTER(0x18230))
diff --git a/include/configs/crs3xx-98dx3236.h
b/include/configs/crs3xx-98dx3236.h
index e2ba7b81263f..3feaa60edad8 100644
--- a/include/configs/crs3xx-98dx3236.h
+++ b/include/configs/crs3xx-98dx3236.h
@@ -12,7 +12,6 @@
#define CONFIG_SYS_BOOTM_LEN (64 * 1024 * 1024) /* 64 MB */
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg
-#define CONFIG_SYS_TCLK 200000000 /* 200MHz */
/* USB/EHCI configuration */
#define CONFIG_EHCI_IS_TDI
diff --git a/include/configs/db-xc3-24g4xg.h b/include/configs/db-xc3-24g4xg.h
index 0e9ccd9b4419..f04ae487b76a 100644
--- a/include/configs/db-xc3-24g4xg.h
+++ b/include/configs/db-xc3-24g4xg.h
@@ -11,7 +11,6 @@
*/
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg
-#define CONFIG_SYS_TCLK 200000000 /* 200MHz */
/* USB/EHCI configuration */
#define CONFIG_EHCI_IS_TDI
Viele Grüße,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
