This mvebu axp platform always uses fixed 250 MHz TCLK. So specify this CONFIG_SYS_TCLK option in msys section of global file soc.h file instead of manual configuration in every board file.
Now every #if-#else case of soc.h file defines CONFIG_SYS_TCLK, so remove useless default CONFIG_SYS_TCLK value from the end of soc.h file. Signed-off-by: Pali Rohár <p...@kernel.org> --- arch/arm/mach-mvebu/include/mach/soc.h | 3 --- include/configs/db-mv784mp-gp.h | 1 - include/configs/ds414.h | 1 - include/configs/maxbcm.h | 1 - include/configs/theadorable.h | 1 - 5 files changed, 7 deletions(-) diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h index e29c0f32c3de..8e8a4058550e 100644 --- a/arch/arm/mach-mvebu/include/mach/soc.h +++ b/arch/arm/mach-mvebu/include/mach/soc.h @@ -208,10 +208,7 @@ #define BOOT_FROM_UART 0x2 #define BOOT_FROM_SPI 0x3 -#endif -/* TCLK Core Clock definition */ -#ifndef CONFIG_SYS_TCLK #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ #endif diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h index ef7eebd081f9..f1b79e8a1fb8 100644 --- a/include/configs/db-mv784mp-gp.h +++ b/include/configs/db-mv784mp-gp.h @@ -16,7 +16,6 @@ * for DDR ECC byte filling in the SPL before loading the main * U-Boot into it. */ -#define CONFIG_SYS_TCLK 250000000 /* 250MHz */ /* I2C */ #define CONFIG_SYS_I2C diff --git a/include/configs/ds414.h b/include/configs/ds414.h index 4bbb244fa227..9fe830965854 100644 --- a/include/configs/ds414.h +++ b/include/configs/ds414.h @@ -18,7 +18,6 @@ * for DDR ECC byte filling in the SPL before loading the main * U-Boot into it. */ -#define CONFIG_SYS_TCLK 250000000 /* 250MHz */ /* I2C */ #define CONFIG_SYS_I2C diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h index 0c2185c529f7..a8cffcb82d43 100644 --- a/include/configs/maxbcm.h +++ b/include/configs/maxbcm.h @@ -15,7 +15,6 @@ * for DDR ECC byte filling in the SPL before loading the main * U-Boot into it. */ -#define CONFIG_SYS_TCLK 250000000 /* 250MHz */ /* I2C */ #define CONFIG_SYS_I2C diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h index 31852fb24801..54e60a4094f8 100644 --- a/include/configs/theadorable.h +++ b/include/configs/theadorable.h @@ -15,7 +15,6 @@ * for DDR ECC byte filling in the SPL before loading the main * U-Boot into it. */ -#define CONFIG_SYS_TCLK 250000000 /* 250MHz */ /* * The debugging version enables USB support via defconfig. -- 2.20.1
