Bit 20 in SAR register specifies if TCLK is running at 200 MHz or 166 MHz. Use this information instead of manual configuration in every board file.
Signed-off-by: Pali Rohár <p...@kernel.org> --- arch/arm/mach-mvebu/include/mach/soc.h | 3 +++ include/configs/db-88f6720.h | 1 - 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h index cb323aa59a76..eb6906ad8027 100644 --- a/arch/arm/mach-mvebu/include/mach/soc.h +++ b/arch/arm/mach-mvebu/include/mach/soc.h @@ -145,6 +145,9 @@ #define BOOT_FROM_UART 0x30 #define BOOT_FROM_SPI 0x38 + +#define CONFIG_SYS_TCLK ((readl(CONFIG_SAR_REG) & BIT(20)) ? \ + 200000000 : 166000000) #elif defined(CONFIG_ARMADA_38X) /* SAR values for Armada 38x */ #define CONFIG_SAR_REG (MVEBU_REGISTER(0x18600)) diff --git a/include/configs/db-88f6720.h b/include/configs/db-88f6720.h index cbb9270f9327..67d8cd42d1c2 100644 --- a/include/configs/db-88f6720.h +++ b/include/configs/db-88f6720.h @@ -15,7 +15,6 @@ * for DDR ECC byte filling in the SPL before loading the main * U-Boot into it. */ -#define CONFIG_SYS_TCLK 200000000 /* 200MHz */ /* I2C */ #define CONFIG_SYS_I2C -- 2.20.1
