The changes introduced by this commit: commit 7a2aa8b68120f333ed2edc33475ca195810d6cb1 Author: Tom Rix <tom....@windriver.com> Date: Thu Sep 10 15:27:57 2009 -0400
OMAP3 Move cache routine to cache.S added, among other things, a number of "push" and "pop" instructions to arch/arm/cpu/arm_cortexa8/omap3/cache.S; older tool chains (like GCC 4.0.0 as included for example with ELDK 4.1) barf on these: -> eldk-switch -r 4.1 arm Setup for arm-linux (using ELDK 4.1) -> ./MAKEALL omap3_sdp3430 Configuring for omap3_sdp3430 board... cache.S: Assembler messages: cache.S:133: Error: bad instruction `push {r0,r1,r2,lr}' cache.S:160: Error: bad instruction `pop {r1,r2,r3,pc}' cache.S:164: Error: bad instruction `push {r0,r1,r2,lr}' cache.S:191: Error: bad instruction `pop {r1,r2,r3,pc}' make[1]: *** [cache.o] Error 1 make: *** [arch/arm/cpu/arm_cortexa8/omap3/libomap3.a] Error 2 Is there a way to write this code without suing these insns? Thanks in advance. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de God may be subtle, but He isn't plain mean. - Albert Einstein _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot