On 7/29/19 3:19 PM, Adam Ford wrote:
> On Mon, Jul 29, 2019 at 7:30 AM Marek Vasut <ma...@denx.de> wrote:
>>
>> On 7/29/19 2:16 PM, Adam Ford wrote:
>>> On Sun, Jun 30, 2019 at 5:21 PM Adam Ford <aford...@gmail.com> wrote:
>>>>
>>>> The omap3.dtsi file shows the usbhshost node with two sub-nodes
>>>> for ohci and ehci. This patch file creates the usbhshost, and
>>>> pulls the portX-mode information. It then locates the EHCI
>>>> sub-node, and initializes the EHCI controller with the info
>>>> pulled from the usbhshost node.
>>>>
>>>> There is still more to do since there isn't an actual link
>>>> between the 'phys' reference and the corresponding phy driver,
>>>> and there is no nop-xceiv driver yet.
>>>>
>>>> In the meantime, the older style reference to
>>>> CONFIG_OMAP_EHCI_PHYx_RESET_GPIO is still needed to pull
>>>> the phy out of reset until the phy driver is completed and the
>>>> phandle reference is made.
>>>>
>>>> Signed-off-by: Adam Ford <aford...@gmail.com>
>>>>
>>>
>>> Marek,
>>>
>>> Some subsequent patches that were depending on this have been applied
>>> already, but they cannot be really useful until this patch is applied.
>>> Is there any chance it can be applied? It will give some of the OMAP3
>>> boards the USB EHCI functionality which has been lost for a little
>>> while.
>>
>> Sure, I am kinda busy and don't have enough free time to cope with this.
>> Moreover, u-boot-usb/master fails to build:
>> https://travis-ci.org/marex/u-boot-usb/builds/563567738
>>
>> Can you take a look whether it's this patchset that causes it ?
>
> Marek,
>
> I looked at the Travis logs, and it looks like the da850evm_nand and
> da850evm_direct_nor were failing, so I tried to clone
> git clone --depth=50 --branch=master
> https://github.com/marex/u-boot-usb.git marex/u-boot-usb based on line
> 846 of the Travis log.
>
> When I built da850evm_nand and da850evm_direct_nor, I could not
> replicate either the build error.
I see, strange, I can replicate the error.
$ make da850evm_nand_defconfig ; make -j9
...
drivers/usb/host/ohci-hcd.c: In function ‘usb_lowlevel_init’:
drivers/usb/host/ohci-hcd.c:2056:35: error:
‘CONFIG_SYS_USB_OHCI_REGS_BASE’ undeclared (first use in this function);
did you mean ‘CONFIG_SYS_USB_OHCI_CPU_INIT’?
gohci.regs = (struct ohci_regs *)CONFIG_SYS_USB_OHCI_REGS_BASE;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CONFIG_SYS_USB_OHCI_CPU_INIT
drivers/usb/host/ohci-hcd.c:2056:35: note: each undeclared identifier is
reported only once for each function it appears in
LD drivers/usb/musb-new/built-in.o
drivers/usb/host/ohci-hcd.c:2060:20: error:
‘CONFIG_SYS_USB_OHCI_SLOT_NAME’ undeclared (first use in this function);
did you mean ‘CONFIG_SYS_USB_OHCI_CPU_INIT’?
gohci.slot_name = CONFIG_SYS_USB_OHCI_SLOT_NAME;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CONFIG_SYS_USB_OHCI_CPU_INIT
LD drivers/mtd/spi/spi-nor.o
make[1]: *** [scripts/Makefile.build:279: drivers/usb/host/ohci-hcd.o]
Error 1
make: *** [Makefile:1594: drivers/usb/host] Error 2
make: *** Waiting for unfinished jobs....
+CC Heiko
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
