On Fri, Mar 8, 2019 at 11:32 PM Peter Robinson <pbrobin...@gmail.com> wrote: > > Hey Tom and Jagan, > > > Hey all, > > > > So it's release day and I've put up v2019.04-rc3, I've updated git and > > the tarballs are also up now. > > > > Thanks again to having signed tags, between -rc2 and -rc3 we have a good > > changelog under 'git log --merges v2019.04-rc2..v2019.04-rc3' > > > > We're looking at release on April 8th, 2019. > > I've had reports of crashes on AllWinner A20 devices, at least > Cubieboard2, CubieTruck and BananaPi, with rc2/rc3 (I'm not 100% sure > when it started) in Fedora. I'm suspecting some of the DM migration > here. > > Are either of you aware of any issues there? > > Crash below. > > Regards, > Peter > > U-Boot SPL 2019.04-rc3 (Mar 05 2019 - 14:49:53 +0000) > DRAM: 2048 MiB > CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 > Trying to boot from MMC1 > > > U-Boot 2019.04-rc3 (Mar 05 2019 - 14:49:53 +0000) Allwinner Technology > > CPU: Allwinner A20 (SUN7I) > Model: Cubietech Cubietruck > I2C: ready > DRAM: 2 GiB > MMC: mmc@1c0f000: 0, mmc@1c12000: 1 > Loading Environment from FAT... ** No valid partitions found ** > Setting up a 1024x768 vga console (overscan 0x0) > In: serial > Out: vga > Err: vga > Allwinner mUSB OTG (Peripheral) > SCSI: Target spinup took 0 ms. > AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode > flags: ncq stag pm led clo only pmp pio slum part ccc apst > > Net: sunxi_set_gate: (CLK#66) unhandled > eth0: ethernet@1c50000 > Warning: usb_ether using MAC address from ROM > , eth1: usb_ether > starting USB... > USB0: USB EHCI 1.00 > USB1: USB OHCI 1.0 > USB2: USB EHCI 1.00 > USB3: USB OHCI 1.0 > scanning bus 0 for devices... 1 USB Device(s) found > scanning bus 1 for devices... 1 USB Device(s) found > scanning bus 2 for devices... 1 USB Device(s) found > scanning bus 3 for devices... 1 USB Device(s) found > scanning usb for storage devices... 0 Storage Device(s) found > Hit any key to stop autoboot: 0 > switch to partitions #0, OK > mmc0 is current device > ** Invalid partition 1 **
are you sure, your sd has partitions? Can you switch mmc dev and check the contents, mean while I can try it on A20 later tomorrow. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
