On Thu, Mar 28, 2019 at 12:10 AM Peter Robinson <pbrobin...@gmail.com> wrote: > > > > Hi Jagan, > > > > > > Did you get a chance to test this? We've seen this on at least Cubie2, > > > CubieTruck and BananaPi and it still persists with rc4 > > > > I made a quick test on v2019.01 vs v2019.04-rc3, below are the > > results. I even grab the reg dump for your information. please check > > the same. > > So further testing on this from the people seeing the problem shows > it's an issue when booting the OS off a SATA/AHCI attached device. So > a mSD card with U-Boot on it and the rest of the OS on a SSD or > similar, booting the OS off mSD works as expected.
Is sd issue still persist? > > Output: > > U-Boot SPL 2019.04-rc4 (Mar 20 2019 - 15:48:13 +0000) > DRAM: 2048 MiB > CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 > Trying to boot from MMC1 > > > U-Boot 2019.04-rc4 (Mar 20 2019 - 15:48:13 +0000) Allwinner Technology > > CPU: Allwinner A20 (SUN7I) > Model: Cubietech Cubietruck > I2C: ready > DRAM: 2 GiB > MMC: mmc@1c0f000: 0, mmc@1c12000: 1 > Loading Environment from FAT... Unable to use mmc 0:2... Setting up a > 1024x768 vga console (overscan 0x0) > In: serial > Out: vga > Err: vga > Allwinner mUSB OTG (Peripheral) > SCSI: Target spinup took 0 ms. > AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode > flags: ncq stag pm led clo only pmp pio slum part ccc apst > > Net: sunxi_set_gate: (CLK#66) unhandled > eth0: ethernet@1c50000 > Warning: usb_ether using MAC address from ROM > , eth1: usb_ether > starting USB... > USB0: USB EHCI 1.00 > USB1: USB OHCI 1.0 > USB2: USB EHCI 1.00 > USB3: USB OHCI 1.0 > scanning bus 0 for devices... 1 USB Device(s) found > scanning bus 1 for devices... 1 USB Device(s) found > scanning bus 2 for devices... 1 USB Device(s) found > scanning bus 3 for devices... 1 USB Device(s) found > scanning usb for storage devices... 0 Storage Device(s) found > Hit any key to stop autoboot: 0 > => scsi info > => scsi reset > > Reset SCSI > scanning bus for devices... > data abort > pc : [<bef8b82a>] lr : [<bef86e51>] > reloc pc : [<4a01c82a>] lr : [<4a017e51>] > sp : baf46b58 ip : 0000001c fp : 000000c0 > r10: 00000000 r9 : baf4eed8 r8 : 00000000 > r7 : baf46dd8 r6 : befd4094 r5 : befdbd30 r4 : befdbd30 > r3 : 00000000 r2 : 00000000 r1 : ea000016 r0 : befdbd30 > Flags: nZcv IRQs off FIQs off Mode SVC_32 > Code: e92dbd10 f8d045f0 b0858080 1000f8d8 (f8d14604) > Resetting CPU ... Have you reproduce the same in previous release? better bisect it. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
