On Thu, Dec 27, 2018 at 3:49 PM Tom Rini <tr...@konsulko.com> wrote: > > On Tue, Dec 18, 2018 at 12:30:50PM +0100, Lukasz Majewski wrote: > > > This commit prevents from re-configuring pins if those were configured > > before relocation. > > > > Some pins - like UART or DDR must be setup before relocation > > (as they have 'u-boot,dm-pre-reloc' property set in DTS). Without this > > change, those pins are re-configured after relocation (pre_reloc_only = 0, > > so we do not "continue"). > > Such behavior may be a problem for DDR PAD configuration, as they might > > be already leveled/tuned with original setup). > > > > Signed-off-by: Lukasz Majewski <lu...@denx.de> > > Applied to u-boot/master, thanks! >
I've bisected out to this commit and it's slightly broken things for me on an AM3352. It all works fine so long as I boot MLO from MMC (so the MMC is probed, pinctrl setup), but if I boot from UART then I get to full U-Boot, MMC hasn't been probed and the pinmuxing isn't set up for the MMC. -- Alex Kiernan _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
