On 03/25/2010 07:49 PM, Wolfgang Denk wrote: > Dear Thomas Chou, > > In message<1269397761-23394-1-git-send-email-tho...@wytron.com.tw> you wrote: > >> This patch adds status polling method to offer an alternative to >> data toggle method for amd flash chips. >> >> This patch is needed for nios2 cfi flash interface, where the bus >> controller performs 4 bytes read cycles for a single byte read >> instruction. The data toggle method can not detect chip busy >> status correctly. So we have to poll DQ7, which will be inverted >> when the chip is busy. >> >> This feature is enabled with the config def, >> CONFIG_SYS_CFI_FLASH_STATUS_POLL >> >> In flash_erase, the verbose printing of '.' is changed that it will >> go with each sector whether successed or failed. >> > Please split this part off into a separate patch. This is a global > change to the user interface and must be discussed separately. > > Best regards, > > Wolfgang Denk > > Hi Wolfgang and Stefan,
I will restore the original printing so that the user interface won't change. Best regards, Thomas _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
