This patch adds status polling method to offer an alternative to
data toggle method for amd flash chips.
This patch is needed for nios2 cfi flash interface, where the bus
controller performs 4 bytes read cycles for a single byte read
instruction. The data toggle method can not detect chip busy
status correctly. So we have to poll DQ7, which will be inverted
when the chip is busy.
This feature is enabled with the config def,
CONFIG_SYS_CFI_FLASH_STATUS_POLL
Include patch, "drivers/mtd/cfi_flash: precision and underflow
problem in tout calculation", submitted by
Alessandro Rubini <rub...@gnudd.com>
Renato Andreola <renato.andre...@imagos.it>
Signed-off-by: Thomas Chou <tho...@wytron.com.tw>
---
drivers/mtd/cfi_flash.c | 78 ++++++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 77 insertions(+), 1 deletions(-)
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index fdba297..db22255 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -537,7 +537,10 @@ static int flash_status_check (flash_info_t * info,
flash_sect_t sector,
ulong start;
#if CONFIG_SYS_HZ != 1000
- tout *= CONFIG_SYS_HZ/1000;
+ if ((ulong)CONFIG_SYS_HZ > 100000)
+ tout *= (ulong)CONFIG_SYS_HZ / 1000; /* for a big HZ, avoid
overflow */
+ else
+ tout = DIV_ROUND_UP (tout * (ulong)CONFIG_SYS_HZ, 1000);
#endif
/* Wait for command completion */
@@ -555,6 +558,53 @@ static int flash_status_check (flash_info_t * info,
flash_sect_t sector,
return ERR_OK;
}
+#ifdef CONFIG_SYS_CFI_FLASH_STATUS_POLL
+static int flash_status_poll (flash_info_t *info, void *src, void *dst,
+ ulong tout, char *prompt)
+{
+ ulong start;
+ int ready;
+
+#if CONFIG_SYS_HZ != 1000
+ if ((ulong)CONFIG_SYS_HZ > 100000)
+ tout *= (ulong)CONFIG_SYS_HZ / 1000; /* for a big HZ, avoid
overflow */
+ else
+ tout = DIV_ROUND_UP (tout * (ulong)CONFIG_SYS_HZ, 1000);
+#endif
+
+ /* Wait for command completion */
+ start = get_timer (0);
+ while (1) {
+ switch (info->portwidth) {
+ case FLASH_CFI_8BIT:
+ ready = flash_read8(dst) == flash_read8(src);
+ break;
+ case FLASH_CFI_16BIT:
+ ready = flash_read16(dst) == flash_read16(src);
+ break;
+ case FLASH_CFI_32BIT:
+ ready = flash_read32(dst) == flash_read32(src);
+ break;
+ case FLASH_CFI_64BIT:
+ ready = flash_read64(dst) == flash_read64(src);
+ break;
+ default:
+ ready = 0;
+ break;
+ }
+ if (ready)
+ break;
+ if (get_timer (start) > tout) {
+ printf ("Flash %s timeout at address %lx data %lx\n",
+ prompt, (ulong)dst, (ulong)flash_read8(dst));
+ return ERR_TIMOUT;
+ }
+ udelay (1); /* also triggers watchdog */
+ }
+ return ERR_OK;
+}
+#endif
+
/*-----------------------------------------------------------------------
* Wait for XSR.7 to be set, if it times out print an error, otherwise
* do a full status check.
@@ -749,6 +799,13 @@ static int flash_write_cfiword (flash_info_t * info, ulong
dest,
if (!sect_found)
sect = find_sector (info, dest);
+#ifdef CONFIG_SYS_CFI_FLASH_STATUS_POLL
+ if (info->vendor == CFI_CMDSET_AMD_EXTENDED ||
+ info->vendor == CFI_CMDSET_AMD_STANDARD)
+ return flash_status_poll (info, &cword, dstaddr,
+ info->write_tout, "write");
+ else
+#endif
return flash_full_status_check (info, sect, info->write_tout, "write");
}
@@ -911,9 +968,14 @@ static int flash_write_cfibuffer (flash_info_t * info,
ulong dest, uchar * cp,
}
flash_write_cmd (info, sector, 0, AMD_CMD_WRITE_BUFFER_CONFIRM);
+#ifdef CONFIG_SYS_CFI_FLASH_STATUS_POLL
+ retcode = flash_status_poll (info, src - (1 << shift),
+ dst - (1 << shift), info->buffer_write_tout, "buffer
write");
+#else
retcode = flash_full_status_check (info, sector,
info->buffer_write_tout,
"buffer write");
+#endif
break;
default:
@@ -935,6 +997,10 @@ int flash_erase (flash_info_t * info, int s_first, int
s_last)
int rcode = 0;
int prot;
flash_sect_t sect;
+#ifdef CONFIG_SYS_CFI_FLASH_STATUS_POLL
+ cfiword_t cword = (cfiword_t)0xffffffffffffffffULL;
+ void *dest;
+#endif
if (info->flash_id != FLASH_MAN_CFI) {
puts ("Can't erase unknown flash type - aborted\n");
@@ -998,6 +1064,16 @@ int flash_erase (flash_info_t * info, int s_first, int
s_last)
break;
}
+#ifdef CONFIG_SYS_CFI_FLASH_STATUS_POLL
+ dest = flash_map (info, sect, 0);
+ flash_unmap (info, sect, 0, dest);
+ if ((info->vendor == CFI_CMDSET_AMD_EXTENDED ||
+ info->vendor == CFI_CMDSET_AMD_STANDARD) &&
+ flash_status_poll (info, &cword, dest,
+ info->erase_blk_tout, "erase"))
+ rcode = 1;
+ else
+#endif
if (flash_full_status_check
(info, sect, info->erase_blk_tout, "erase")) {
rcode = 1;
--
1.6.6.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
