The patch converts the ep1c20 board to use the common cfi flash
and spi driver.
The addressing of devices is changed to virtual address.
Signed-off-by: Thomas Chou <tho...@wytron.com.tw>
---
board/altera/ep1c20/Makefile | 2 +-
board/altera/ep1c20/config.mk | 2 +-
board/altera/ep1c20/u-boot.lds | 1 +
include/configs/EP1C20.h | 60 ++++++++++++++++++++++++++-------------
4 files changed, 43 insertions(+), 22 deletions(-)
diff --git a/board/altera/ep1c20/Makefile b/board/altera/ep1c20/Makefile
index acad2aa..c57ef1a 100644
--- a/board/altera/ep1c20/Makefile
+++ b/board/altera/ep1c20/Makefile
@@ -28,7 +28,7 @@ endif
LIB = $(obj)lib$(BOARD).a
-COMOBJS := ../common/AMDLV065D.o ../common/epled.o
+COMOBJS := ../common/epled.o
COBJS := $(BOARD).o $(COMOBJS)
diff --git a/board/altera/ep1c20/config.mk b/board/altera/ep1c20/config.mk
index dab2740..6cb9629 100644
--- a/board/altera/ep1c20/config.mk
+++ b/board/altera/ep1c20/config.mk
@@ -21,7 +21,7 @@
# MA 02111-1307 USA
#
-TEXT_BASE = 0x01fc0000
+#TEXT_BASE = 0x01fc0000
PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include
diff --git a/board/altera/ep1c20/u-boot.lds b/board/altera/ep1c20/u-boot.lds
index e2eb3aa..fa7ed30 100644
--- a/board/altera/ep1c20/u-boot.lds
+++ b/board/altera/ep1c20/u-boot.lds
@@ -28,6 +28,7 @@ ENTRY(_start)
SECTIONS
{
+ . = text_base;
.text :
{
cpu/nios2/start.o (.text)
diff --git a/include/configs/EP1C20.h b/include/configs/EP1C20.h
index 61d8e20..cf6960a 100644
--- a/include/configs/EP1C20.h
+++ b/include/configs/EP1C20.h
@@ -24,6 +24,9 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#define CONFIG_SYS_BOARD_NAME "EP1C20"
+#define IO_REGION_BASE 0x80000000
+
/*------------------------------------------------------------------------
* BOARD/CPU
*----------------------------------------------------------------------*/
@@ -32,7 +35,7 @@
#define CONFIG_SYS_RESET_ADDR 0x00000000 /* Hard-reset address
*/
#define CONFIG_SYS_EXCEPTION_ADDR 0x01000020 /* Exception entry
point*/
-#define CONFIG_SYS_NIOS_SYSID_BASE 0x021208b8 /* System id address
*/
+#define CONFIG_SYS_NIOS_SYSID_BASE 0x821208b8 /* System id address
*/
#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/
/*------------------------------------------------------------------------
@@ -47,7 +50,7 @@
/*------------------------------------------------------------------------
* MEMORY BASE ADDRESSES
*----------------------------------------------------------------------*/
-#define CONFIG_SYS_FLASH_BASE 0x00000000 /* FLASH base addr
*/
+#define CONFIG_SYS_FLASH_BASE 0x80000000 /* FLASH base addr
*/
#define CONFIG_SYS_FLASH_SIZE 0x00800000 /* 8 MByte
*/
#define CONFIG_SYS_SDRAM_BASE 0x01000000 /* SDRAM base addr
*/
#define CONFIG_SYS_SDRAM_SIZE 0x01000000 /* 16 MByte
*/
@@ -61,23 +64,29 @@
* -Global data is placed below the heap.
* -The stack is placed below global data (&grows down).
*----------------------------------------------------------------------*/
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 128k
*/
+#define CONFIG_SYS_TEXT_LEN (256 * 1024) /* Reserve 256k */
+#define CONFIG_SYS_TEXT_BASE (CONFIG_SYS_SDRAM_BASE + \
+ CONFIG_SYS_SDRAM_SIZE -
CONFIG_SYS_TEXT_LEN)
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_RESET_ADDR |
IO_REGION_BASE)
+#define CONFIG_SYS_MONITOR_LEN CONFIG_SYS_TEXT_LEN
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size
rsvd*/
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
-#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE -
CONFIG_SYS_MALLOC_LEN)
+#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_TEXT_BASE -
CONFIG_SYS_MALLOC_LEN)
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE -
CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET
/*------------------------------------------------------------------------
* FLASH (AM29LV065D)
*----------------------------------------------------------------------*/
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* fix nios2 flash timing issue in
amd toggle*/
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank
*/
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks
*/
-#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec)
*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec)
*/
-#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char /* flash word size
*/
/*------------------------------------------------------------------------
* ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
@@ -95,13 +104,16 @@
* CONSOLE
*----------------------------------------------------------------------*/
#if defined(CONFIG_CONSOLE_JTAG)
-#define CONFIG_SYS_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr
*/
+#define CONFIG_ALTERA_JTAGUART
#else
-#define CONFIG_SYS_NIOS_CONSOLE 0x02120840 /* UART base addr
*/
+#define CONFIG_ALTERA_UART
#endif
-#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed
*/
-#define CONFIG_BAUDRATE 115200 /* Initial baudrate
*/
+#define CONFIG_SYS_JTAGUART_BASE 0x821208b0 /* JTAG UART base addr
*/
+#define CONFIG_SYS_UART_BASE 0x82120840 /* UART base addr
*/
+
+#define CONFIG_SYS_UART_FREQ CONFIG_SYS_CLK_FREQ
+#define CONFIG_BAUDRATE 115200 /* Initial
baudrate */
#define CONFIG_SYS_BAUDRATE_TABLE {115200} /* It's fixed ;-)
*/
#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* Suppress console
info*/
@@ -112,7 +124,15 @@
* _register_ base address, NOT THE ADDRESS OF THE MEMORY BLOCK.
* The register base is currently at offset 0x600 from the memory base.
*----------------------------------------------------------------------*/
-#define CONFIG_SYS_NIOS_EPCSBASE 0x02100200 /* EPCS register base
*/
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_ALTERA_SPI
+
+#define CONFIG_ENV_SPI_MAX_HZ 30000000
+#define CONFIG_SF_DEFAULT_SPEED 30000000
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SYS_SPI_BASE 0x82100200 /* EPCS register base
*/
/*------------------------------------------------------------------------
* DEBUG
@@ -126,23 +146,23 @@
* registers, we can slow it down to 10 msec using TMRCNT. If the default
* period is acceptable, TMRCNT can be left undefined.
*----------------------------------------------------------------------*/
-#define CONFIG_SYS_NIOS_TMRBASE 0x02120820 /* Tick timer base addr
*/
-#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num
*/
-#define CONFIG_SYS_NIOS_TMRMS 10 /* 10 msec per tick
*/
-#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_NIOS_TMRMS *
(CONFIG_SYS_CLK_FREQ/1000))
-#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ/(CONFIG_SYS_NIOS_TMRCNT +
1))
+#define CONFIG_SYS_TIMER_BASE 0x82120820 /* Tick timer base addr
*/
+#define CONFIG_SYS_TIMER_IRQ 3 /* Timer IRQ num
*/
+#define CONFIG_SYS_TIMER_FREQ CONFIG_SYS_CLK_FREQ /* Timer input
freq */
+#define CONFIG_SYS_HZ 1000 /* should be 1000 for
flash timing */
/*------------------------------------------------------------------------
* STATUS LED -- Provides a simple blinking led. For Nios2 each board
* must implement its own led routines -- leds are, after all,
* board-specific, no?
*----------------------------------------------------------------------*/
-#define CONFIG_SYS_LEDPIO_ADDR 0x02120870 /* LED PIO base addr
*/
+#define CONFIG_SYS_LED_PIO_BASE 0x82120870 /* LED PIO base
addr */
+#define CONFIG_EPLED /* Enable LED PIO driver */
#define CONFIG_STATUS_LED /* Enable status driver */
#define STATUS_LED_BIT 1 /* Bit-0 on PIO */
#define STATUS_LED_STATE 1 /* Blinking */
-#define STATUS_LED_PERIOD (500/CONFIG_SYS_NIOS_TMRMS) /* Every 500 msec
*/
+#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) /* Every 500 msec
*/
/*------------------------------------------------------------------------
* ETHERNET -- The header file for the SMC91111 driver hurts my eyes ...
--
1.6.6.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
