On Tue, 27 Mar 2018, Kever Yang wrote:
We add this for get the location for boot device of bootrom.
Your commit message should be specific enough, so the motivation for the
change, where it fits into the overall architecture and what is changed
are apparent.
Signed-off-by: Kever Yang <kever.y...@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com>
See below for requested changes.
---
arch/arm/mach-rockchip/Kconfig | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index 5dfe452..98bf935 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -209,6 +209,23 @@ config ROCKCHIP_STIMER_BASE
The secure timer inited in SPL/TPL in secure word, ARM generic timer
works after this timer work.
+config ROCKCHIP_IRAM_START_ADDR
+ hex "Rockchip Secure timer base address"
Huh: copy-and-paste?
+ default 0xff0e0000 if ROCKCHIP_PX30
See my earlier comment regarding changes specific to the PX30.
+ default 0x10080000 if ROCKCHIP_RK3036
+ default 0x10080000 if ROCKCHIP_RK3128
+ default 0x10080000 if ROCKCHIP_RK3188
+ default 0x10080000 if ROCKCHIP_RK322X
+ default 0xff700000 if ROCKCHIP_RK3288
+ default 0xff091000 if ROCKCHIP_RK3328
+ default 0xff8c0000 if ROCKCHIP_RK3368
+ default 0xff8c0000 if ROCKCHIP_RK3399
+ default 0x10080000 if ROCKCHIP_RV1108
+ default 0
+ help
+ The IRAM start addr is to locate variant of the boot device from
+ bootrom.
The same comment as for the secure timer-base applies here.
This is way to important to have it in Kconfig, where a user can easily
override.
+
config ROCKCHIP_SPL_RESERVE_IRAM
hex "Size of IRAM reserved in SPL"
default 0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
