On Tue, Jan 12, 2010 at 09:43:55PM -0700, John Rigby wrote:
> struct fsl_nfc_regs {
> - u32 main_area0[128]; /* @0x000 */
> - u32 main_area1[128];
> - u32 main_area2[128];
> - u32 main_area3[128];
> - u32 spare_area0[4];
> - u32 spare_area1[4];
> - u32 spare_area2[4];
> - u32 spare_area3[4];
> - u32 reserved1[64 - 16 + 64 * 5];
> - u16 bufsiz; /* @ 0xe00 */
> + u8 main_area[NAND_MXC_NR_BUFS][512];
> + u8 spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE];
You could do u32 ...[NAND_MXC_SPARE_BUF_SIZE / 4] to avoid the casts later
on...
> diff --git a/nand_spl/nand_boot_fsl_nfc.c b/nand_spl/nand_boot_fsl_nfc.c
> index a9df2a8..02d8330 100644
> --- a/nand_spl/nand_boot_fsl_nfc.c
> +++ b/nand_spl/nand_boot_fsl_nfc.c
> @@ -26,13 +26,17 @@
>
> #include <common.h>
> #include <nand.h>
> +#ifdef CONFIG_MX31
> #include <asm-arm/arch/mx31-regs.h>
> +#else
> +#include <asm-arm/arch/imx-regs.h>
> +#endif
Hmm, can't this be pushed into an arch header?
> #include <asm/io.h>
> #include <fsl_nfc.h>
>
> -static struct fsl_nfc_regs *nfc;
> +struct fsl_nfc_regs *nfc;
>
> -static void nfc_wait_ready(void)
> +void nfc_wait_ready(void)
Why non-static?
> @@ -65,12 +91,12 @@ static void nfc_nand_page_address(unsigned int
> page_address)
> {
> unsigned int page_count;
>
> - writew(0x00, &nfc->flash_cmd);
> + writew(0x00, &nfc->flash_add);
> writew(NFC_ADDR, &nfc->nand_flash_config2);
> nfc_wait_ready();
>
> - /* code only for 2kb flash */
> - if (CONFIG_SYS_NAND_PAGE_SIZE == 0x800) {
> + /* code only for large page flash */
> + if (CONFIG_SYS_NAND_PAGE_SIZE > 512) {
> writew(0x00, &nfc->flash_add);
> writew(NFC_ADDR, &nfc->nand_flash_config2);
> nfc_wait_ready();
> @@ -88,22 +114,38 @@ static void nfc_nand_page_address(unsigned int
> page_address)
> page_count = page_count >> 8;
> } while (page_count);
> }
> +
> + writew(0x00, &nfc->flash_add);
> + writew(NFC_ADDR, &nfc->nand_flash_config2);
> + nfc_wait_ready();
This (along with later bits) looks like it changes the behavior for existing
chips. Have you tested it on a previously-supported chip? Maybe elaborate
on the changes in the commit message.
-Scott
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
