Hi,
+Felipe Balbi
On Tuesday 19 September 2017 04:45 PM, Faiz Abbas wrote:
> A flush of the cache is required before any DMA access can take place.
> The minimum size that can be flushed from the cache is one cache line
> size. Therefore, any buffer allocated for DMA should be in multiples
> of cache line size.
>
> Thus, allocate memory for ep0_trb in multiples of cache line size.
>
> Also, when local variable trb is assigned to dwc->ep0_trb[1] and used
> to flush cache, it leads to cache misaligned messages as only the base
> address dwc->ep0_trb is cache aligned.
>
> Therefore, flush cache using ep0_trb_addr which is always cache aligned.
>
> Signed-off-by: Faiz Abbas <faiz_ab...@ti.com>
> ---
> drivers/usb/dwc3/ep0.c | 7 ++++---
> drivers/usb/dwc3/gadget.c | 3 ++-
> 2 files changed, 6 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
> index e61d980..f3a17a1 100644
> --- a/drivers/usb/dwc3/ep0.c
> +++ b/drivers/usb/dwc3/ep0.c
> @@ -82,7 +82,7 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum,
> dma_addr_t buf_dma,
> | DWC3_TRB_CTRL_LST);
>
> dwc3_flush_cache((uintptr_t)buf_dma, len);
> - dwc3_flush_cache((uintptr_t)trb, sizeof(*trb));
> + dwc3_flush_cache((uintptr_t)dwc->ep0_trb_addr, sizeof(*trb) * 2);
>
> if (chain)
> return 0;
> @@ -790,7 +790,7 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
> if (!r)
> return;
>
> - dwc3_flush_cache((uintptr_t)trb, sizeof(*trb));
> + dwc3_flush_cache((uintptr_t)dwc->ep0_trb_addr, sizeof(*trb) * 2);
>
> status = DWC3_TRB_SIZE_TRBSTS(trb->size);
> if (status == DWC3_TRBSTS_SETUP_PENDING) {
> @@ -821,7 +821,8 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
> ur->actual += transferred;
>
> trb++;
> - dwc3_flush_cache((uintptr_t)trb, sizeof(*trb));
> + dwc3_flush_cache((uintptr_t)dwc->ep0_trb_addr,
> + sizeof(*trb) * 2);
> length = trb->size & DWC3_TRB_SIZE_MASK;
>
> ep0->free_slot = 0;
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index e065c5a..895a5bc 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -2567,7 +2567,8 @@ int dwc3_gadget_init(struct dwc3 *dwc)
> goto err0;
> }
>
> - dwc->ep0_trb = dma_alloc_coherent(sizeof(*dwc->ep0_trb) * 2,
> + dwc->ep0_trb = dma_alloc_coherent(ROUND(sizeof(*dwc->ep0_trb) * 2,
> + CACHELINE_SIZE),
> (unsigned long *)&dwc->ep0_trb_addr);
> if (!dwc->ep0_trb) {
> dev_err(dwc->dev, "failed to allocate ep0 trb\n");
>
Thanks,
Faiz
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
