On 2017/6/8 20:11, Marek Vasut wrote:
On 06/08/2017 09:31 AM, Meng Dongyang wrote:
Add support of usb host and gadget function for rk3328.
Why did I receive half of the series as a series (that is, cover letter
and patches IRT to that) and half as separate emails ?
Because there is a limit to the number of letter one time.
Changes in v4:
- Splite patch [U-boot,v3,04/10] into two patches
- Define set vbus as empty function if the macros aren't set
- Prepare a mask and set capabilities in GUSBCFG register once
Changes in v3:
- Revert change of macro definition in dwc2 driver
- Support host mode without HNP/SRP capability through DTS
Changes in v2:
- Add commit messages
- Split patch [U-boot,7/8] into two patches
- Use fixed regulator to control vbus instead of gpio
Meng Dongyang (11):
configs: rk3328: add support for usb and config ehci and ohci driver
rockchip: dts: rk3328: add ehci and ohci node and enable host0 port
configs: rk3328: config xhci controller
usb: host: xhci-rockchip: use fixed regulator to control vbus
usb: host: xhci-rockchip: add support for rk3328
rockchip: dts: rk3328: support and enable xhci
configs: rk3328: enable dwc2 driver and config for fastboot
usb: dwc2: force to host mode if not support HNP/SRP
rk3328: board: add support of dwc2 gadget
rockchip: dts: rk3328: support and enable dwc2
rockchip: dts: rk3399: control vbus of typec by fixed regulator
arch/arm/dts/rk3328-evb.dts | 36 ++++++++++++++++++++++++++++
arch/arm/dts/rk3328.dtsi | 35 +++++++++++++++++++++++++++
arch/arm/dts/rk3399-evb.dts | 16 +++++++++++--
board/rockchip/evb_rk3328/evb-rk3328.c | 43 +++++++++++++++++++++++++++++++---
configs/evb-rk3328_defconfig | 25 ++++++++++++++++++++
drivers/usb/host/dwc2.c | 19 ++++++++++++---
drivers/usb/host/xhci-rockchip.c | 43 +++++++++++++++++++++++++++-------
include/configs/rk3328_common.h | 9 +++++++
8 files changed, 209 insertions(+), 17 deletions(-)
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
