On 06/08/2017 09:31 AM, Meng Dongyang wrote: > Add support of usb host and gadget function for rk3328.
Why did I receive half of the series as a series (that is, cover letter and patches IRT to that) and half as separate emails ? > Changes in v4: > - Splite patch [U-boot,v3,04/10] into two patches > - Define set vbus as empty function if the macros aren't set > - Prepare a mask and set capabilities in GUSBCFG register once > > Changes in v3: > - Revert change of macro definition in dwc2 driver > - Support host mode without HNP/SRP capability through DTS > > Changes in v2: > - Add commit messages > - Split patch [U-boot,7/8] into two patches > - Use fixed regulator to control vbus instead of gpio > > Meng Dongyang (11): > configs: rk3328: add support for usb and config ehci and ohci driver > rockchip: dts: rk3328: add ehci and ohci node and enable host0 port > configs: rk3328: config xhci controller > usb: host: xhci-rockchip: use fixed regulator to control vbus > usb: host: xhci-rockchip: add support for rk3328 > rockchip: dts: rk3328: support and enable xhci > configs: rk3328: enable dwc2 driver and config for fastboot > usb: dwc2: force to host mode if not support HNP/SRP > rk3328: board: add support of dwc2 gadget > rockchip: dts: rk3328: support and enable dwc2 > rockchip: dts: rk3399: control vbus of typec by fixed regulator > > arch/arm/dts/rk3328-evb.dts | 36 ++++++++++++++++++++++++++++ > arch/arm/dts/rk3328.dtsi | 35 +++++++++++++++++++++++++++ > arch/arm/dts/rk3399-evb.dts | 16 +++++++++++-- > board/rockchip/evb_rk3328/evb-rk3328.c | 43 > +++++++++++++++++++++++++++++++--- > configs/evb-rk3328_defconfig | 25 ++++++++++++++++++++ > drivers/usb/host/dwc2.c | 19 ++++++++++++--- > drivers/usb/host/xhci-rockchip.c | 43 > +++++++++++++++++++++++++++------- > include/configs/rk3328_common.h | 9 +++++++ > 8 files changed, 209 insertions(+), 17 deletions(-) > -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot