[U-Boot] [PATCH v4 04/11] usb: host: xhci-rockchip: use fixed regulator to control vbus

[Meng Dongyang]

Use fixed regulator to control the voltage of vbus and turn off
vbus when usb stop.

Signed-off-by: Meng Dongyang <daniel.m...@rock-chips.com>
---

Changes in v4:
- Splited from patch [Uboot,v3,04/10]
- Define set vbus as empty function if the macros aren't set

Changes in v3: None
Changes in v2:
- Use fixed regulator to control vbus instead of gpio

 drivers/usb/host/xhci-rockchip.c | 41 +++++++++++++++++++++++++++++++---------
 1 file changed, 32 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/host/xhci-rockchip.c b/drivers/usb/host/xhci-rockchip.c
index f559830..dc9cd56 100644
--- a/drivers/usb/host/xhci-rockchip.c
+++ b/drivers/usb/host/xhci-rockchip.c
@@ -11,10 +11,10 @@
 #include <malloc.h>
 #include <usb.h>
 #include <watchdog.h>
-#include <asm/gpio.h>
 #include <linux/errno.h>
 #include <linux/compat.h>
 #include <linux/usb/dwc3.h>
+#include <power/regulator.h>
 
 #include "xhci.h"
 
@@ -23,7 +23,7 @@ DECLARE_GLOBAL_DATA_PTR;
 struct rockchip_xhci_platdata {
        fdt_addr_t hcd_base;
        fdt_addr_t phy_base;
-       struct gpio_desc vbus_gpio;
+       struct udevice *vbus_supply;
 };
 
 /*
@@ -66,15 +66,37 @@ static int xhci_usb_ofdata_to_platdata(struct udevice *dev)
                return -ENXIO;
        }
 
-       /* Vbus gpio */
-       ret = gpio_request_by_name(dev, "rockchip,vbus-gpio", 0,
-                                  &plat->vbus_gpio, GPIOD_IS_OUT);
+#if defined(CONFIG_DM_USB) && defined(CONFIG_DM_REGULATOR)
+       /* Vbus regulator */
+       ret = device_get_supply_regulator(dev, "vbus-supply",
+                                         &plat->vbus_supply);
        if (ret)
-               debug("rockchip,vbus-gpio node missing!");
+               debug("Can't get vbus supply\n");
+#endif
 
        return 0;
 }
 
+#if defined(CONFIG_DM_USB) && defined(CONFIG_DM_REGULATOR)
+static int rockchip_xhci_set_vbus(struct rockchip_xhci_platdata *plat,
+                                 bool value)
+{
+       int ret = 0;
+
+       ret = regulator_set_enable(plat->vbus_supply, value);
+       if (ret)
+               debug("XHCI: Failed to set vbus supply\n");
+
+       return ret;
+}
+#else
+static int rockchip_xhci_set_vbus(struct rockchip_xhci_platdata *plat,
+                                 bool value)
+{
+       return 0;
+}
+#endif
+
 /*
  * rockchip_dwc3_phy_setup() - Configure USB PHY Interface of DWC3 Core
  * @dwc: Pointer to our controller context structure
@@ -153,9 +175,7 @@ static int xhci_usb_probe(struct udevice *dev)
        hcor = (struct xhci_hcor *)((uint64_t)ctx->hcd +
                        HC_LENGTH(xhci_readl(&ctx->hcd->cr_capbase)));
 
-       /* setup the Vbus gpio here */
-       if (dm_gpio_is_valid(&plat->vbus_gpio))
-               dm_gpio_set_value(&plat->vbus_gpio, 1);
+       rockchip_xhci_set_vbus(plat, true);
 
        ret = rockchip_xhci_core_init(ctx, dev);
        if (ret) {
@@ -168,6 +188,7 @@ static int xhci_usb_probe(struct udevice *dev)
 
 static int xhci_usb_remove(struct udevice *dev)
 {
+       struct rockchip_xhci_platdata *plat = dev_get_platdata(dev);
        struct rockchip_xhci *ctx = dev_get_priv(dev);
        int ret;
 
@@ -178,6 +199,8 @@ static int xhci_usb_remove(struct udevice *dev)
        if (ret)
                return ret;
 
+       rockchip_xhci_set_vbus(plat, false);
+
        return 0;
 }
 
-- 
1.9.1


_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot