On 06/08/2017 09:31 AM, Meng Dongyang wrote:
> Use fixed regulator to control the voltage of vbus and turn off
> vbus when usb stop.
>
> Signed-off-by: Meng Dongyang <daniel.m...@rock-chips.com>
> ---
>
> Changes in v4:
> - Splited from patch [Uboot,v3,04/10]
> - Define set vbus as empty function if the macros aren't set
>
> Changes in v3: None
> Changes in v2:
> - Use fixed regulator to control vbus instead of gpio
>
> drivers/usb/host/xhci-rockchip.c | 41
> +++++++++++++++++++++++++++++++---------
> 1 file changed, 32 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-rockchip.c
> b/drivers/usb/host/xhci-rockchip.c
> index f559830..dc9cd56 100644
> --- a/drivers/usb/host/xhci-rockchip.c
> +++ b/drivers/usb/host/xhci-rockchip.c
> @@ -11,10 +11,10 @@
> #include <malloc.h>
> #include <usb.h>
> #include <watchdog.h>
> -#include <asm/gpio.h>
> #include <linux/errno.h>
> #include <linux/compat.h>
> #include <linux/usb/dwc3.h>
> +#include <power/regulator.h>
>
> #include "xhci.h"
>
> @@ -23,7 +23,7 @@ DECLARE_GLOBAL_DATA_PTR;
> struct rockchip_xhci_platdata {
> fdt_addr_t hcd_base;
> fdt_addr_t phy_base;
> - struct gpio_desc vbus_gpio;
> + struct udevice *vbus_supply;
> };
>
> /*
> @@ -66,15 +66,37 @@ static int xhci_usb_ofdata_to_platdata(struct udevice
> *dev)
> return -ENXIO;
> }
>
> - /* Vbus gpio */
> - ret = gpio_request_by_name(dev, "rockchip,vbus-gpio", 0,
> - &plat->vbus_gpio, GPIOD_IS_OUT);
> +#if defined(CONFIG_DM_USB) && defined(CONFIG_DM_REGULATOR)
> + /* Vbus regulator */
> + ret = device_get_supply_regulator(dev, "vbus-supply",
> + &plat->vbus_supply);
> if (ret)
> - debug("rockchip,vbus-gpio node missing!");
> + debug("Can't get vbus supply\n");
VBUS in caps
> +#endif
>
> return 0;
> }
>
> +#if defined(CONFIG_DM_USB) && defined(CONFIG_DM_REGULATOR)
> +static int rockchip_xhci_set_vbus(struct rockchip_xhci_platdata *plat,
> + bool value)
> +{
> + int ret = 0;
You don't need to init ret, it's always set right below.
> +
> + ret = regulator_set_enable(plat->vbus_supply, value);
> + if (ret)
> + debug("XHCI: Failed to set vbus supply\n");
That shouldn't be debug, that's a printf() because it's actually a
failure. Or error() I guess ...
> + return ret;
> +}
> +#else
> +static int rockchip_xhci_set_vbus(struct rockchip_xhci_platdata *plat,
> + bool value)
> +{
> + return 0;
> +}
> +#endif
> +
> /*
> * rockchip_dwc3_phy_setup() - Configure USB PHY Interface of DWC3 Core
> * @dwc: Pointer to our controller context structure
> @@ -153,9 +175,7 @@ static int xhci_usb_probe(struct udevice *dev)
> hcor = (struct xhci_hcor *)((uint64_t)ctx->hcd +
> HC_LENGTH(xhci_readl(&ctx->hcd->cr_capbase)));
>
> - /* setup the Vbus gpio here */
> - if (dm_gpio_is_valid(&plat->vbus_gpio))
> - dm_gpio_set_value(&plat->vbus_gpio, 1);
> + rockchip_xhci_set_vbus(plat, true);
What about handling the return value ?
> ret = rockchip_xhci_core_init(ctx, dev);
> if (ret) {
> @@ -168,6 +188,7 @@ static int xhci_usb_probe(struct udevice *dev)
>
> static int xhci_usb_remove(struct udevice *dev)
> {
> + struct rockchip_xhci_platdata *plat = dev_get_platdata(dev);
> struct rockchip_xhci *ctx = dev_get_priv(dev);
> int ret;
>
> @@ -178,6 +199,8 @@ static int xhci_usb_remove(struct udevice *dev)
> if (ret)
> return ret;
>
> + rockchip_xhci_set_vbus(plat, false);
Handle return value
> return 0;
> }
>
>
--
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
