Am Mittwoch 04 November 2009 01:34:53 schrieb myub...@fastmail.fm:
> Hi,
>
> I am trying to define multiple partitions using mtdparts variable. But I
> can't get it set automatically right.
>
> I defined the set_bootargs as the following:
> set_bootargs=setenv bootargs root=/dev/mtdblock2 rootfs=cramfs,jffs2
> mtdparts=ph
> ysmap-flash.0:256k(u-boot),256k(u-boot-env),7936k(root1),7936k(root2);physmap-fl
> ash.1:16384k(data) console=ttyS0,115200n8
>
> But when I run set_bootargs, I got the following error -
> # run set_bootargs
> Unknown command 'physmap-flash.1:16384k(data)' - try 'help'
> Can someone help me with the correct format on mtdparts? thanks a lot.
>
I don't know the exact format but it looks like the ";" between
(root2);physmap-flash1 causes your error?
Dieter
>
> ====================================================
> mtdparts=mtdparts=physmap-flash.0:256k(u-boot),256k(u-boot-env),7936k(root1),793
> 6k(root2);physmap-flash.1:16384k(data)
> boot=run set_bootargs;chpart nor0,${boot_device};fsload
> boot/uImage;bootm
> mtdids=nor0=physmap-flash.0,nor1=physmap-flash.1
> partition=nor0,2
> mtddevnum=2
> mtddevname=root1
> set_bootargs=setenv bootargs root=/dev/mtdblock2 rootfs=cramfs,jffs2
> mtdparts=ph
> ysmap-flash.0:256k(u-boot),256k(u-boot-env),7936k(root1),7936k(root2);physmap-fl
> ash.1:16384k(data) console=ttyS0,115200n8
> bootargs=root=/dev/mtdblock2 rootfs=cramfs,jffs2
> mtdparts=physmap-flash.0:256k(u
> -boot),256k(u-boot-env),7936k(root1),7936k(root2)
>
> Environment size: 847/262140 bytes
> # run set_bootargs
> Unknown command 'physmap-flash.1:16384k(data)' - try 'help'
> #
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
