Hi, I am trying to define multiple partitions using mtdparts variable. But I can't get it set automatically right.
I defined the set_bootargs as the following: set_bootargs=setenv bootargs root=/dev/mtdblock2 rootfs=cramfs,jffs2 mtdparts=ph ysmap-flash.0:256k(u-boot),256k(u-boot-env),7936k(root1),7936k(root2);physmap-fl ash.1:16384k(data) console=ttyS0,115200n8 But when I run set_bootargs, I got the following error - # run set_bootargs Unknown command 'physmap-flash.1:16384k(data)' - try 'help' Can someone help me with the correct format on mtdparts? thanks a lot. ==================================================== mtdparts=mtdparts=physmap-flash.0:256k(u-boot),256k(u-boot-env),7936k(root1),793 6k(root2);physmap-flash.1:16384k(data) boot=run set_bootargs;chpart nor0,${boot_device};fsload boot/uImage;bootm mtdids=nor0=physmap-flash.0,nor1=physmap-flash.1 partition=nor0,2 mtddevnum=2 mtddevname=root1 set_bootargs=setenv bootargs root=/dev/mtdblock2 rootfs=cramfs,jffs2 mtdparts=ph ysmap-flash.0:256k(u-boot),256k(u-boot-env),7936k(root1),7936k(root2);physmap-fl ash.1:16384k(data) console=ttyS0,115200n8 bootargs=root=/dev/mtdblock2 rootfs=cramfs,jffs2 mtdparts=physmap-flash.0:256k(u -boot),256k(u-boot-env),7936k(root1),7936k(root2) Environment size: 847/262140 bytes # run set_bootargs Unknown command 'physmap-flash.1:16384k(data)' - try 'help' # _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot