From: Vinitha Pillai-B57223 <vinitha.pil...@nxp.com>
Add QSPI Secure Boot target. Also enable sec init.
Signed-off-by: Vinitha Pillai <vinitha.pil...@nxp.com>
Signed-off-by: Sumit Garg <sumit.g...@nxp.com>
---
board/freescale/ls1046ardb/Kconfig | 2 +-
board/freescale/ls1046ardb/MAINTAINERS | 4 +++
board/freescale/ls1046ardb/ls1046ardb.c | 19 ++++++++++++++
configs/ls1046ardb_qspi_SECURE_BOOT_defconfig | 37 +++++++++++++++++++++++++++
include/configs/ls1046ardb.h | 2 ++
5 files changed, 63 insertions(+), 1 deletion(-)
create mode 100644 configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
diff --git a/board/freescale/ls1046ardb/Kconfig
b/board/freescale/ls1046ardb/Kconfig
index a62255c..b9f2ed7 100644
--- a/board/freescale/ls1046ardb/Kconfig
+++ b/board/freescale/ls1046ardb/Kconfig
@@ -12,5 +12,5 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "ls1046ardb"
-
+source "board/freescale/common/Kconfig"
endif
diff --git a/board/freescale/ls1046ardb/MAINTAINERS
b/board/freescale/ls1046ardb/MAINTAINERS
index ff42bef..758ff9d 100644
--- a/board/freescale/ls1046ardb/MAINTAINERS
+++ b/board/freescale/ls1046ardb/MAINTAINERS
@@ -7,3 +7,7 @@ F: include/configs/ls1046ardb.h
F: configs/ls1046ardb_qspi_defconfig
F: configs/ls1046ardb_sdcard_defconfig
F: configs/ls1046ardb_emmc_defconfig
+
+M: Sumit Garg <sumit.g...@nxp.com>
+S: Maintained
+F: configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
diff --git a/board/freescale/ls1046ardb/ls1046ardb.c
b/board/freescale/ls1046ardb/ls1046ardb.c
index 02b6c4c..df69dcf 100644
--- a/board/freescale/ls1046ardb/ls1046ardb.c
+++ b/board/freescale/ls1046ardb/ls1046ardb.c
@@ -21,6 +21,7 @@
#include <fsl_esdhc.h>
#include <power/mc34vr500_pmic.h>
#include "cpld.h"
+#include <fsl_sec.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -71,6 +72,24 @@ int board_init(void)
enable_layerscape_ns_access();
#endif
+#ifdef CONFIG_SECURE_BOOT
+ /*
+ * In case of Secure Boot, the IBR configures the SMMU
+ * to allow only Secure transactions.
+ * SMMU must be reset in bypass mode.
+ * Set the ClientPD bit and Clear the USFCFG Bit
+ */
+ u32 val;
+ val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
+ out_le32(SMMU_SCR0, val);
+ val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
+ out_le32(SMMU_NSCR0, val);
+#endif
+
+#ifdef CONFIG_FSL_CAAM
+ sec_init();
+#endif
+
#ifdef CONFIG_FSL_LS_PPA
ppa_init();
#endif
diff --git a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
new file mode 100644
index 0000000..af14e19
--- /dev/null
+++ b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
@@ -0,0 +1,37 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1046ARDB=y
+CONFIG_FSL_LS_PPA=y
+CONFIG_QSPI_AHB_INIT=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_QSPI_BOOT=y
+CONFIG_SECURE_BOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_SPI_FLASH=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_QSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_RSA=y
diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h
index 2141b82..196db81 100644
--- a/include/configs/ls1046ardb.h
+++ b/include/configs/ls1046ardb.h
@@ -239,4 +239,6 @@
"7e800000.flash:16m(nand_uboot)," \
"48m(nand_kernel),448m(nand_free)"
+#include <asm/fsl_secure_boot.h>
+
#endif /* __LS1046ARDB_H__ */
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
