Add NOR secure boot target. Also enable sec init.
Signed-off-by: Vinitha Pillai <vinitha.pil...@nxp.com>
Signed-off-by: Sumit Garg <sumit.g...@nxp.com>
---
board/freescale/ls1046aqds/MAINTAINERS | 4 ++++
board/freescale/ls1046aqds/ls1046aqds.c | 19 ++++++++++++++++
configs/ls1046aqds_SECURE_BOOT_defconfig | 39 ++++++++++++++++++++++++++++++++
3 files changed, 62 insertions(+)
create mode 100644 configs/ls1046aqds_SECURE_BOOT_defconfig
diff --git a/board/freescale/ls1046aqds/MAINTAINERS
b/board/freescale/ls1046aqds/MAINTAINERS
index b4549ae..6737d55 100644
--- a/board/freescale/ls1046aqds/MAINTAINERS
+++ b/board/freescale/ls1046aqds/MAINTAINERS
@@ -8,3 +8,7 @@ F: configs/ls1046aqds_nand_defconfig
F: configs/ls1046aqds_sdcard_ifc_defconfig
F: configs/ls1046aqds_sdcard_qspi_defconfig
F: configs/ls1046aqds_qspi_defconfig
+
+M: Sumit Garg <sumit.g...@nxp.com>
+S: Maintained
+F: configs/ls1046aqds_SECURE_BOOT_defconfig
diff --git a/board/freescale/ls1046aqds/ls1046aqds.c
b/board/freescale/ls1046aqds/ls1046aqds.c
index af3f70a..8def6e6 100644
--- a/board/freescale/ls1046aqds/ls1046aqds.c
+++ b/board/freescale/ls1046aqds/ls1046aqds.c
@@ -21,6 +21,7 @@
#include <fsl_csu.h>
#include <fsl_esdhc.h>
#include <fsl_ifc.h>
+#include <fsl_sec.h>
#include <spl.h>
#include "../common/vid.h"
@@ -265,6 +266,24 @@ int board_init(void)
if (adjust_vdd(0))
printf("Warning: Adjusting core voltage failed.\n");
+#ifdef CONFIG_SECURE_BOOT
+ /*
+ * In case of Secure Boot, the IBR configures the SMMU
+ * to allow only Secure transactions.
+ * SMMU must be reset in bypass mode.
+ * Set the ClientPD bit and Clear the USFCFG Bit
+ */
+ u32 val;
+ val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
+ out_le32(SMMU_SCR0, val);
+ val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
+ out_le32(SMMU_NSCR0, val);
+#endif
+
+#ifdef CONFIG_FSL_CAAM
+ sec_init();
+#endif
+
return 0;
}
diff --git a/configs/ls1046aqds_SECURE_BOOT_defconfig
b/configs/ls1046aqds_SECURE_BOOT_defconfig
new file mode 100644
index 0000000..dc16fa0
--- /dev/null
+++ b/configs/ls1046aqds_SECURE_BOOT_defconfig
@@ -0,0 +1,39 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1046AQDS=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_SECURE_BOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_DSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_RSA=y
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
