Hello Tom,
Am 10.01.2017 um 17:40 schrieb Tom Rini:
On Tue, Jan 10, 2017 at 08:08:51AM +0100, Heiko Schocher wrote:
commit: 65f83802b7a5b "serial: 16550: Add getfcr accessor"
breaks u-boot commandline working with long commands
sending to the board.
Since the above patch, you have to setup the fcr register.
For board/archs which enable OF_PLATDATA, the new field
fcr in struct ns16550_platdata is not filled with a
default value ...
This leads in not setting up the uarts fifo, which ends
in problems, when you send long commands to u-boots
commandline.
Detected this issue with automated tbot tests on am335x
based shc board.
The error does not popup, if you type commands. You need
to copy&paste a long command to u-boots commandshell
(or send a long command with tbot)
Possible boards/plattforms with problems:
./arch/arm/cpu/arm926ejs/lpc32xx/devices.c
./arch/arm/mach-tegra/board.c
./board/isee/igep00x0/igep00x0.c
./board/overo/overo.c
./board/quipos/cairo/cairo.c
./board/logicpd/omap3som/omap3logic.c
./board/logicpd/zoom1/zoom1.c
./board/timll/devkit8000/devkit8000.c
./board/lg/sniper/sniper.c
./board/ti/beagle/beagle.c
./drivers/serial/serial_rockchip.c
This patch fixes only:
./arch/arm/mach-omap2/am33xx/board.c
Signed-off-by: Heiko Schocher <h...@denx.de>
Good find! I didn't catch this in my setups as nothing in test.py is
currently long enough to trigger this apparently (I have both an am335x
evm and a beagleboard in my setup). By inspection, the right fix for
all platforms would be to put the old default value in as this is what
was missed in the original patch from Marek.
The problems are boards/archs, which create "struct ns16550_platdata"
on their own ... I added the original value for fcr in
./arch/arm/mach-omap2/am33xx/board.c
Do you mean, I should grep for all this places and
fix them in my patch (without having the chance to test it) ?
Ok, seems a valid solution ... I try to do this today.
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
