Hi Heiko,
On Tue, Jan 10, 2017 at 08:08:51AM +0100, Heiko Schocher wrote:
> commit: 65f83802b7a5b "serial: 16550: Add getfcr accessor"
> breaks u-boot commandline working with long commands
> sending to the board.
>
> Since the above patch, you have to setup the fcr register.
>
> For board/archs which enable OF_PLATDATA, the new field
> fcr in struct ns16550_platdata is not filled with a
> default value ...
>
> This leads in not setting up the uarts fifo, which ends
> in problems, when you send long commands to u-boots
> commandline.
>
> Detected this issue with automated tbot tests on am335x
> based shc board.
>
> The error does not popup, if you type commands. You need
> to copy&paste a long command to u-boots commandshell
> (or send a long command with tbot)
>
> Possible boards/plattforms with problems:
> ./arch/arm/cpu/arm926ejs/lpc32xx/devices.c
> ./arch/arm/mach-tegra/board.c
> ./board/isee/igep00x0/igep00x0.c
> ./board/overo/overo.c
> ./board/quipos/cairo/cairo.c
> ./board/logicpd/omap3som/omap3logic.c
> ./board/logicpd/zoom1/zoom1.c
> ./board/timll/devkit8000/devkit8000.c
> ./board/lg/sniper/sniper.c
> ./board/ti/beagle/beagle.c
> ./drivers/serial/serial_rockchip.c
Quick test shows igep00x0 also suffers from this issue.
Are you going to collect fixes and apply them as one patch or
shall I sent a separate patch?
Anyway, here's fix for igep00x0:
Signed-off-by: Ladislav Michl <la...@linux-mips.org>
diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c
index ae7959b1eb..8bea199a44 100644
--- a/board/isee/igep00x0/igep00x0.c
+++ b/board/isee/igep00x0/igep00x0.c
@@ -32,7 +32,8 @@ DECLARE_GLOBAL_DATA_PTR;
static const struct ns16550_platdata igep_serial = {
.base = OMAP34XX_UART3,
.reg_shift = 2,
- .clock = V_NS16550_CLK
+ .clock = V_NS16550_CLK,
+ .fcr = UART_FCR_FIFO_EN | UART_FCR_RXSR | UART_FCR_TXSR,
};
U_BOOT_DEVICE(igep_uart) = {
> This patch fixes only:
> ./arch/arm/mach-omap2/am33xx/board.c
>
> Signed-off-by: Heiko Schocher <h...@denx.de>
> ---
>
> arch/arm/mach-omap2/am33xx/board.c | 23 +++++++++++++++++------
> 1 file changed, 17 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/am33xx/board.c
> b/arch/arm/mach-omap2/am33xx/board.c
> index 581c0ab..a0ce62c 100644
> --- a/arch/arm/mach-omap2/am33xx/board.c
> +++ b/arch/arm/mach-omap2/am33xx/board.c
> @@ -39,15 +39,26 @@
> DECLARE_GLOBAL_DATA_PTR;
>
> #if !CONFIG_IS_ENABLED(OF_CONTROL)
> +/* Clear & enable FIFOs */
> +#define UART_FCRVAL (UART_FCR_FIFO_EN | \
> + UART_FCR_RXSR | \
> + UART_FCR_TXSR)
> +
> static const struct ns16550_platdata am33xx_serial[] = {
> - { .base = CONFIG_SYS_NS16550_COM1, .reg_shift = 2, .clock =
> CONFIG_SYS_NS16550_CLK },
> + { .base = CONFIG_SYS_NS16550_COM1, .reg_shift = 2,
> + .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCRVAL },
> # ifdef CONFIG_SYS_NS16550_COM2
> - { .base = CONFIG_SYS_NS16550_COM2, .reg_shift = 2, .clock =
> CONFIG_SYS_NS16550_CLK },
> + { .base = CONFIG_SYS_NS16550_COM2, .reg_shift = 2,
> + .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCRVAL },
> # ifdef CONFIG_SYS_NS16550_COM3
> - { .base = CONFIG_SYS_NS16550_COM3, .reg_shift = 2, .clock =
> CONFIG_SYS_NS16550_CLK },
> - { .base = CONFIG_SYS_NS16550_COM4, .reg_shift = 2, .clock =
> CONFIG_SYS_NS16550_CLK },
> - { .base = CONFIG_SYS_NS16550_COM5, .reg_shift = 2, .clock =
> CONFIG_SYS_NS16550_CLK },
> - { .base = CONFIG_SYS_NS16550_COM6, .reg_shift = 2, .clock =
> CONFIG_SYS_NS16550_CLK },
> + { .base = CONFIG_SYS_NS16550_COM3, .reg_shift = 2,
> + .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCRVAL },
> + { .base = CONFIG_SYS_NS16550_COM4, .reg_shift = 2,
> + .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCRVAL },
> + { .base = CONFIG_SYS_NS16550_COM5, .reg_shift = 2,
> + .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCRVAL },
> + { .base = CONFIG_SYS_NS16550_COM6, .reg_shift = 2,
> + .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCRVAL },
> # endif
> # endif
> };
> --
> 2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
