On Tue, Jan 10, 2017 at 08:08:51AM +0100, Heiko Schocher wrote: > commit: 65f83802b7a5b "serial: 16550: Add getfcr accessor" > breaks u-boot commandline working with long commands > sending to the board. > > Since the above patch, you have to setup the fcr register. > > For board/archs which enable OF_PLATDATA, the new field > fcr in struct ns16550_platdata is not filled with a > default value ... > > This leads in not setting up the uarts fifo, which ends > in problems, when you send long commands to u-boots > commandline. > > Detected this issue with automated tbot tests on am335x > based shc board. > > The error does not popup, if you type commands. You need > to copy&paste a long command to u-boots commandshell > (or send a long command with tbot) > > Possible boards/plattforms with problems: > ./arch/arm/cpu/arm926ejs/lpc32xx/devices.c > ./arch/arm/mach-tegra/board.c > ./board/isee/igep00x0/igep00x0.c > ./board/overo/overo.c > ./board/quipos/cairo/cairo.c > ./board/logicpd/omap3som/omap3logic.c > ./board/logicpd/zoom1/zoom1.c > ./board/timll/devkit8000/devkit8000.c > ./board/lg/sniper/sniper.c > ./board/ti/beagle/beagle.c > ./drivers/serial/serial_rockchip.c > > This patch fixes only: > ./arch/arm/mach-omap2/am33xx/board.c > > Signed-off-by: Heiko Schocher <h...@denx.de>
Good find! I didn't catch this in my setups as nothing in test.py is currently long enough to trigger this apparently (I have both an am335x evm and a beagleboard in my setup). By inspection, the right fix for all platforms would be to put the old default value in as this is what was missed in the original patch from Marek. -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
